Proscan programming question

[NYAirOne]

I have a question regarding proscan when i load my file into my scanners. I make up my own custom lists for my radios in proscan. Say the list has 20 different systems in it. Once the radio takes the file from proscan, every system turns on in the radio. I have to manually go and turn everything off and just put on what system i want that radio to have running. Am i missing some setting in proscan to make it not do this??

 

[dave3825]

What scanners? For X36/SDS there are options to turn stuff on.

 

[BinaryMode]

Or... Look in the Database tab | Quick Keys / Search keys.

There you can set which systems are active or not active when they are programed to your radio.

 

[cg]

If those options don't fix it...
If you simply program in the same file every time (with edits or subtractions) you will get the same result. You can program the scanner, get it the way you want it, then read the scanner and save the file. That good file will then program the scanner the same way each time

 

[Whiskey3JMC]

Uncheck these two while writing to scanner if you have them checked. If you're not seeing these options then reply back with what model Uniden you're using so we can give you the applicable option(s)

 

[NYAirOne]

Radios are sds200/100, 536hp and 996p2 and 15x

 

[dave3825]

Radios are sds200/100, 536hp and 996p2 and 15x

Okay, so do you see the prompts in the picture above when you write to the scanners?

 

[NYAirOne]

Okay, so do you see the prompts in the picture above when you write to the scanners?

Is it this at the bottom of pic? This is a shot from 996P2 Proscan

 

[cg]

Those radios don't all act the same with programming. However, when you choose Upload to the 996P2, you will see some options. If you are happy with what is being scanned, select the last option, Dont Send SQK & GQK Status. You will upload the Systems selected but not change the Quick Key settings. Unchecking the Send Settings box will leave all existing settings in the radio alone.

 

[dave3825]

The pic I posted is for x36 and SDS series radios.

 

[Whiskey3JMC]

Is it this at the bottom of pic? This is a shot from 996P2 Proscan

Radios are sds200/100, 536hp, and 996p2 and 15x

I no longer own a 996p2 or 15X but with regards to the x36s/SDSx00s as I mentioned in post #5 you'll see these options while you write to the scanner (after selecting scanner to write to then clicking OK). Same screen where you check the favorites list boxes you wish to include in the write

 

[NYAirOne]

Those radios don't all act the same with programming. However, when you choose Upload to the 996P2, you will see some options. If you are happy with what is being scanned, select the last option, Dont Send SQK & GQK Status. You will upload the Systems selected but not change the Quick Key settings. Unchecking the Send Settings box will leave all existing settings in the radio alone.

View attachment 183798

Just had a chance to try this and it still turns on every system??

 

[NYAirOne]

The pic I posted is for x36 and SDS series radios.

The pic I posted is for x36 and SDS series radios.

I forgot im using Sentinel for programming the sds series radios. Any idea on a setting for that?

 

[dave3825]

Did you uncheck the quick keys you do not want on before sending to scanner?

 

[Whiskey3JMC]

I forgot im using Sentinel for programming the sds series radios. Any idea on a setting for that?

You need to turn off the FLs/QKs and then read from scanner