Regina Public Schools DMR Reception

[SatHunter]

I’ve been trying to receive this channel with my Baofeng DM32 UV radio. I entered the frequency as listed in the database - 463.1625 MHz.
I entered the color code & slot with info from DSD+. It shows up on the signal meter when they transmit but I get no audio.
DSD+ also displays the talkgroup. I’m not sure if this has to be entered somewhere. It’s a new radio so I’m totally lost in the menus. I receive it fine in DSD+ so I assume the Baofeng should be able to receive it as well. Assistance would be greatly appreciated

 

[ultrajv]

I'm not familiar with the radio but You do need to set the talkgroup. If you can't hear after setting talk group then the transmission may also have RAS which will mean you can't hear it on most radios.

 

[SatHunter]

I'm not familiar with the radio but You do need to set the talkgroup. If you can't hear after setting talk group then the transmission may also have RAS which will mean you can't hear it on most radios.

Thanks for your reply. I grabbed a snapshot of the talkgroup & other associated settings for DSD+ & then tried to find where to put the TG in the endless menus. I’m not sure if DSD+ would display if RAS is in use on this channel. Otherwise it’s a very capable radio for $70. I was really surprised how well airband comes in & it seems to have decent battery life. The supplied antenna leaves a lot to be desired.
I mainly purchased to radio to play around with DMR so I’m hoping it will work with some of the transmissions in the area

 

[AnthonyL2025]

Thanks for your reply. I grabbed a snapshot of the talkgroup & other associated settings for DSD+ & then tried to find where to put the TG in the endless menus. I’m not sure if DSD+ would display if RAS is in use on this channel. Otherwise it’s a very capable radio for $70. I was really surprised how well airband comes in & it seems to have decent battery life. The supplied antenna leaves a lot to be desired.
I mainly purchased to radio to play around with DMR so I’m hoping it will work with some of the transmissions in the area

You have to enter the talkgroup as a tx contact. So, create it in the talkgroup section, then add it to list under tx contact, which is in the channel settings.