RSP Montreal Pierre Boucher

[Pape]

Decided to program the RSP Montreal Pierre Boucher.
Not sure of what is going on but the primary control channel is not broadcasting and the alternate is actually the one for ST Bruno.

After poking around here what I found can this be confirmed ?

1 859.7625c
2 859.5125
3 859.2625
4 867.0125
5 866.2125
6 867.7125
7 866.7125

Thanks

 

[quebecradioguy]

Hi, what is you Scanner? Because you can use a PC software to program you Scanner the proper way using Radioreference database integration

 

[quebecradioguy]

But i can see there is 2 Primary controls Channels for pierre boucher. No alternative.

 

[Pape]

Hi,

I use Unitrunker and did do the DL from RR, did not give me the best of result.

if you can monitor PB I recommend you sit on the provided Control Chan and let me know what you get.
for me 01 does not broadcast and 03 get me a 5 channels system by deduction it must be ST Bruno.

 

[quebecradioguy]

I'm in St-Eustache... The farest tower I monitor is Pointe-clair and the Simulcast. I'll program it in my scanner and will see next time i go near south shore

 

[Pape]

so started monitoring 859.3125 it contain 5 channel 1C+4

it mostly (Fire dispatch is entirely missing) the same thing I have in my system linked in my first post but distributed on 4 channels.
It is also interesting to note the Site is reported as site 8 and the site in my first post is reported as site 30

 

[quebecradioguy]

The site 8 is St-Bruno

 

[Pape]

Yup as pointed in my original post:
In the dB site 30 primary control channel is dead and alternative control channel is for St Bruno (site 8)

 

[quebecradioguy]

You use Unitrunker with DSD? Because i tried many times to get this setup to work with 2 dongles but finally deceided to buy a scanner..

 

[Pape]

Currently have 3 dongles in unitrunker and one outside for hunting down voice channels to populate unitrunker voices channels.

Right now I got site 8 and 30 running side by side simultaneously and hunting down the site 8 voices channels.

I have the third dongles on voice configured analog out on speakers and digital out on vb cable to dsd+

At one point I will add my forth dongles to monitor a third sites, wish I can add more but my splitter is only a 4 outputs

At some point I will go to the p25 rsp if you want to tag along on That project, tu es le bienvenu ��

 

[quebecradioguy]

Et bien j'ai mon PSR-500 sur les deux systeme presentement. C'est assez tranquille sur le P25. Mais le EDACS est en migration sur le nouveau P25.

 

[Pape]

Pas mal plus pour le projet que d'autre choses, vue que tu as déjà l'équipement

 

[quebecradioguy]

Ouais! J'ai jamais réussi a faire fonctionner Unitruncker... J'ai les control channels et tout les call mais aucun son... Je dois me tromper dans une config de DSD virtual cable ou SDRsharp

 

[quebecradioguy]

Mais j'aimerais bien réussi a le faire fonctionner.. J'ai 3 Dongles qui serve a rien si il n'est pas fonctionnel...

 

[Pape]

Unitrunker fonctionne sans sdr# maintenant
pour ce qui est de dsd / dsd+ le plus difficile est d'ajuster le volume

 

[quebecradioguy]

Est-tu en mesure de me donner ta procédure? J'aimerais beaucoup le faire fonctionner sur mon ordinateur.

 

[Pape]

Le quel tu veux écouter ?

 

[quebecradioguy]

J'aimerais mieux le P25 car les pompiers de St-Eustache sont sur ce systeme. Mais jecoute la police de deux montagmes sur le EDACS.

 

[Pape]

donc le p25
as tu Tes valeurs ppm pour les 2 dongles?

 

[Pape]

ca va aussi prendre:
SRD#
VB cable / Virtual cable
dsd+ recomandé