Scanner power connector. What is this?

SurgePGH

Active Member
Premium Subscriber
Joined
Jan 30, 2008
Messages
642
Location
Belle Vernon, PA
Any idea what the name of this connector is? What is the name of the connector that plugs into this?

IMG_8807.jpeg
 

BinaryMode

Blondie Once Said To Call Her But Never Answerd
Joined
Jul 3, 2023
Messages
1,167
Location
2600 dialtone blvd
Question if I may, and possible insightful Info. for the OP.

The back the radio shows AC and positive and negative polarity. Seen as how there is no positive or negative conductors in AC, is that Jones plug meant for AC and DC? And if so, I hope that plug comes with a wiring diagram to help the OP...
 

N9JIG

Sheriff
Moderator
Joined
Dec 14, 2001
Messages
6,121
Location
Far NW Valley
Question if I may, and possible insightful Info. for the OP.

The back the radio shows AC and positive and negative polarity. Seen as how there is no positive or negative conductors in AC, is that Jones plug meant for AC and DC? And if so, I hope that plug comes with a wiring diagram to help the OP...
The vertical pins are for 12VDC and the horizontals are for AC.

These connectors were common on old Regency crystal scanners. I blew up one of mine by reversing the AC wires and when the radio made contact with a grounded antenna it went ka-blewy.
 

SurgePGH

Active Member
Premium Subscriber
Joined
Jan 30, 2008
Messages
642
Location
Belle Vernon, PA
You guys rock! I found one on eBay BUT they wanted $30 plus crazy shipping. The markings were from me. I traced out the wires inside and the applied DC power. This is on an old (70’s vintage) Robyn High-Low Bander scanner. I ordered crystals that came today. Installed them and this thing sounds amazing! NOW I need to find a source for the light lens covers. I’m in search of two green and a white one.

Thanks for the help!
 

Attachments

  • IMG_8848.jpeg
    IMG_8848.jpeg
    95.9 KB · Views: 14
  • IMG_8845.jpeg
    IMG_8845.jpeg
    65.1 KB · Views: 15

AB4BF

Member
Premium Subscriber
Joined
Apr 13, 2008
Messages
607
Location
EM93cs
You guys rock! I found one on eBay BUT they wanted $30 plus crazy shipping. The markings were from me. I traced out the wires inside and the applied DC power. This is on an old (70’s vintage) Robyn High-Low Bander scanner. I ordered crystals that came today. Installed them and this thing sounds amazing! NOW I need to find a source for the light lens covers. I’m in search of two green and a white one.

Thanks for the help!
Interestingly, last night I was watching a you tube video of an electronics store in Tucson, AZ. They had millions (it looked like) of surplus panel lights and covers. Elliot Electronics, Tucson, AZ.
Hope that helps, good luck and 73!
 
Top