Frequency Manager v1.1.9.0
(FreqMan)
Have been getting familiar with Frequency Manager v1.1.9.0 plug-in for a few day and have some feedback for a few tweaks. But first. Thank you for this plug-in that provides some nice and useful features beyond the SDR# built-in frequency manager.
1) The "Name" column should use natural sort order (i.e. 1,2,3 ... 10,11,12; rather than 1,10,11,12 ... 2,3).
2) Multi entry selection to set/release the scan check mark, delete or edit multiple.
3) 'Auto update radio settings' alert
An option to auto turn off and restore when scan is stopped. Or to ignore, or use the band plan settings.
4) Move to frequency even if not playing (i.e. before start playing).
5) Configure Frequency Manager
The set squelch on scan option also sets the squelch when selecting an entry manually.
6) FrequencyManager(FreqMan).pdf:
s/Don't set “Detect ms” to low as signal/Don't set “Detect ms” too low as signal/
s/When there are to many labels to display/When there are too many labels to display/
s/Tuning to a frequency a click "New"/Tune to a frequency and click "New"/
Thanks again for the tools.
(FreqMan)
Have been getting familiar with Frequency Manager v1.1.9.0 plug-in for a few day and have some feedback for a few tweaks. But first. Thank you for this plug-in that provides some nice and useful features beyond the SDR# built-in frequency manager.
1) The "Name" column should use natural sort order (i.e. 1,2,3 ... 10,11,12; rather than 1,10,11,12 ... 2,3).
2) Multi entry selection to set/release the scan check mark, delete or edit multiple.
3) 'Auto update radio settings' alert
An option to auto turn off and restore when scan is stopped. Or to ignore, or use the band plan settings.
4) Move to frequency even if not playing (i.e. before start playing).
5) Configure Frequency Manager
The set squelch on scan option also sets the squelch when selecting an entry manually.
6) FrequencyManager(FreqMan).pdf:
s/Don't set “Detect ms” to low as signal/Don't set “Detect ms” too low as signal/
s/When there are to many labels to display/When there are too many labels to display/
s/Tuning to a frequency a click "New"/Tune to a frequency and click "New"/
Thanks again for the tools.
