Tag group changes

[SOCCERCOACH]

I was just wondering if anyone has the information on the tag group changes for the Mass Eniv Pd, the current ones are not working on Zone 5 although MSP, the airwing are coming in fine. Was there a change?, its not showing anywhere that I could find Thank you

Mike

 

[russellmaher]

Mike: Are you referring to the talkgroup IDs for the Environmental Police on the new MSP P-25 system?

Russell

 

[KB1UAM]

For the analog it seems that 39152 is patched to 39120. I have both talkgroups side by side and the same words are being said on each talkgroup. 39120 maybe the new dispatch talkgroup. 39120 doesn't show the ptch on the top of my pro-106, but on 39152 ptch keeps flashing.

 

[ecps92]

First Question is Make/Model ??

Older Scanners (Trunk Trackers) did not handle the TG's if they had one of the Alternate Status Bits (Patch, Emerg, Multi Select etc)

Nothing has changed for the newer scanners, except they do have one of the Talk-Groups patched, so they have P25 coverage in Western Mass at this time. This patch comes-n-goes periodically.

I was just wondering if anyone has the information on the tag group changes for the Mass Eniv Pd, the current ones are not working on Zone 5 although MSP, the airwing are coming in fine. Was there a change?, its not showing anywhere that I could find Thank you

Mike

 

[SOCCERCOACH]

Good Morning yes the talk groups for Mass Envir PD, last week was getting them fine after changing the new CC And yesterday they dont work anymore although in Zone 5 getting MSP l/c. If they have gone to P25 then I wouldnt get them using the 780

 

[ecps92]

. If they have gone to P25 then I wouldnt get them using the 780

What we are referencing is a Patch from the Western Mass P25 system into the Analog Eastern Mass System, so YES you can hear them

Good Morning yes the talk groups for Mass Envir PD, last week was getting them fine after changing the new CC And yesterday they dont work anymore although in Zone 5 getting MSP l/c. If they have gone to P25 then I wouldnt get them using the 780

The 780XLT handles Control channel Only and the Status Bits

I would double check your programming and make sure you are on Zone 5 and not Zone 1 or one of the others that the DLE/MEP are not on.

 

[SOCCERCOACH]

I realize the 780 handles it and it was all working fine, just this past week Mass Eniv cease to work, so i was wondering if they changed talk groups or went to P25, maybe since they are simulcasting into P25 it will not work on the 780. Just asking since I do not know the answer. And i have Zone 5 programmed which is working fine with MSP A trp status bits is on Thank you

 

[ecps92]

No they did not go P25 (in Eastern Mass) as the P25 is 700 and Western Mass, it's still Analog for East of Springfield.

The Simulcast/Patch is from East into the Western Mass network , it's still Analog out here and will be for a long time.

I would check to ensure you did not accidentally lock them out

I realize the 780 handles it and it was all working fine, just this past week Mass Eniv cease to work, so i was wondering if they changed talk groups or went to P25, maybe since they are simulcasting into P25 it will not work on the 780. Just asking since I do not know the answer. And i have Zone 5 programmed which is working fine with MSP A trp status bits is on Thank you

 

[SOCCERCOACH]

just to update and see if anyone else out there has any answers to this: thank you all for helping: MEP I entered the newest talk grp 39120 and getting MEP l/c, still nothing on the other 3 talk grps 39152-39184-39216. I reprogrammed the entire radio still nothing, use to work fine up to 1 week ago, all the new CC are in and getting A trp, airwing and MEMA l/c on Zone 5, bits is on. Thank you for anymore imput.

Mike