• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

TK780H squelch

Status
Not open for further replies.

w2smw

Member
Joined
Aug 8, 2007
Messages
90
Location
Town of Tonawanda NY
I just got y first Kenwood radio,many Moto, and the service manual has me completely baffeled. What is the easiest way to adjust the squelch a little higher. I need to tighten it up a bit and I know that it is done by setting it with the front buttons but I think I am missing something. Thanks in advance.
 

AA4TX

Member
Joined
Jan 17, 2009
Messages
97
Location
IONAFLXARS0
The squelch level can only be adjusted manually if the "Test Mode" has been enabled using the programming software. If it has, the "Test Mode" can be entered by pressing the "A" key when powering on. From there, follow the menu on page 50 of the service manual to change the squelch level.
 
Status
Not open for further replies.
Top