• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Trunking Free Scan Application Link Release!

Status
Not open for further replies.

stevecch

Unication Representative
Unication Representative
Joined
Mar 25, 2019
Messages
41
Hello guys, I'm Steve from Unication. It's me again and I'm not sure if it is appropriate for me to open a new thread to discuss the same topic in two days. If I'm violated any rules of the forum, I will give the link to the previous post.
Also, to the forum manager, thank you for sticking my post on the top so people can easily see the latest updates of the new feature.

Everyone can have the opportunity to be the Unication Beta Firmware Tester for the Trunking Free Scan feature by completing the required application below.
Here is the link: Click me to be a Unication Beta Tester

I see some users' email on the post or they just PM me directly. But I just want to remind you that only you complete the application is valid; any unofficial ways to give me your information don't work. :LOL:

Unication will initially select some people to give the link away and see if the test situation is good we will let more users make the Beta Test.

Thank you and sorry for do not reply you guys one by one on the post but I read all your comments and get back to the Unication team.

Again, thank you for supporting Unication and we will keep providing the best products to our customers.
 

trido

Active Member
Premium Subscriber
Joined
Dec 19, 2002
Messages
1,193
Location
Southern In
Steve i had issue filling in form on COUNTY it wanted email? So i entered email
 
Last edited:

kruser

Well Known Member
Premium Subscriber
Joined
Nov 25, 2007
Messages
5,071
Location
W St Louis Cnty, MO
Steve i had issue filling in form lets see if other did on COUNTY it wanted email? So i entered email
I had the same error earlier when I filled out the form so I did the same and just used my email that I filled in earlier in the form.
 

stevecch

Unication Representative
Unication Representative
Joined
Mar 25, 2019
Messages
41
Steve i had issue filling in form on COUNTY it wanted email? So i entered email
Sorry to make you inconvenient. The County column is corrected. Thanks!
 

mharris

Member
Premium Subscriber
Joined
Dec 19, 2002
Messages
376
Location
Napa, CA.
I also sent another form with my county information. Thanks, Steve!
 
Last edited:

Synchro39

Member
Premium Subscriber
Joined
Feb 7, 2018
Messages
259
Location
Montreal Quebec
do i need to send a second time ??
you can't choose Canada in your form are you going to have some beta tester here in Canada or not ???
 
Last edited:

stevecch

Unication Representative
Unication Representative
Joined
Mar 25, 2019
Messages
41
do i need to send a second time ??
you can't choose Canada in your form are you going to have some beta tester here in Canada or not ???
Hi Synchro39, we add the option for other country people. Please kindly edit your application again. Thank you!
 

blackbelter

Member
Joined
Feb 1, 2004
Messages
882
I couldn’t agree more. My G5 rocks as I am looking forward to the new features . If I can not have an APX or any other professional radios then my amazing G5 will come next .
 

lsh1885

Member
Joined
Oct 6, 2002
Messages
382
Location
Orlando, Florida
There is a short video on YouTube of a demonstration of the new firmware. I didn't even know it had been released yet or maybe he is a beta tester.
 

mharris

Member
Premium Subscriber
Joined
Dec 19, 2002
Messages
376
Location
Napa, CA.
I'm also wondering if we will know the status of our beta applications, and/or if it's out already.
 

mitbr

Active Member
Joined
Jun 22, 2007
Messages
1,377
Location
Tampa Bay Florida
I have a request. Can someone that is a beta tester put up a video showing the pps selections and operation of the new features when they have time?... much appreciated.
Tim :cool:
 
Status
Not open for further replies.
Top