• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Tyt md 2017

Status
Not open for further replies.
Jammin_Jay

Jammin_Jay

Member
Joined
Jul 13, 2004
Messages
718
Reaction score
4
I am thinking on purchasing a tyt md 2017 dmr radio
Does anyone know if this radio perform promiscuous mode to find talkgroups?
 
D

doctordruidphd

Member
Joined
Aug 14, 2006
Messages
49
Reaction score
0
Location
Elma, WA
Yes, it does. However it does not cross time slots -- if you are on a channel that uses time slot 1, it will monitor for TGs on slot 1, but not on slot 2, and visa versa.
 
D

doctordruidphd

Member
Joined
Aug 14, 2006
Messages
49
Reaction score
0
Location
Elma, WA
In the CPS software, under the "Button Definitions" menu, program one of the buttons for "Monitor". Then write your codeplug and load it into the radio. If you are on an Analog channel and press the key you have programmed as Monitor, it will open the squelch. If you press the Monitor button on a digital channel, you will not hear an open squelch, but any talkgroups on the timeslot you have programmed for that channel will come through.
 
Status
Not open for further replies.

Similar threads

TA9APD
Tytera TYT MD UV 390 + 5W Firmware problems
Replies
0
Views
127
TA9APD
TA9APD
U
AES256 on the TYT MD UV390Plus not working with Motorola
Replies
4
Views
515
doriboni
D
I
Tytera TH-9800 plus programming software communication timeout
Replies
4
Views
494
nanook001
N
5
Setting up DMR using promiscuous mode
Replies
4
Views
702
IC-R20
IC-R20
Z
Baofeng DM32 audio issues
Replies
2
Views
358
ZS1DOV
Z
Top