Unitrunker help for FleetNet Zone 2

[EmergencyResponseWatch]

We finally got Unitrunker to pick up the control channel at Site 10 (Harrowsmith Tower) - We have the control channel set to 142.260.

We're picking up the Romeo (Frontenac) units with no issues, from Dispatch and Officers.
The problem we're running into is the Juliet (Lennox and Addington) units are having minor issues. Dispatch is coming through, but the units are not returning according to Unitrunker. We know that they're responding as we can hear it on the repeater channel (413.5375).


In Unitrunker we have the following frequencies listed, 142.485, 141.930, 141.720, 142.995, 142.395, 142.260, 141.540, 142.590, 142.095, and 142.185.


We're local to Lennox and Addington, and are trying to figure out what we're missing.

 

[mciupa]

I don't see 142.485 and 142.185 listed for the Harrowsmith site. Do you see any Napanee talkgroups pop up at all? Try programming Denbigh Site 15 and see what happens.

010 (A)	Harrowsmith (HARROW)	Frontenac	141.540	141.720	141.930	142.095	142.260c	142.395	142.590c
			142.995
011 (B)	Mountain Grove (MTNGRV)	Frontenac	141.360	142.170	142.245c	142.455	142.845
012 (C)	Mount St Patrick (MTSPAT)	Renfrew	141.195	141.495	141.555	142.650c	142.920	143.145c
013 (D)	Pembroke (PEMBRK)	Renfrew	141.435	141.675	142.125	142.380c	142.710c	142.950	143.970
014 (E)	Demorestville (DEMOVL)	Prince Edward	141.195	141.435	141.690	142.320	142.515c	142.620c	142.740
			142.980
015 (F)	Denbigh (DENBIH)	Lennox and Addington	141.390	141.705c	142.230c	142.335	142.545	142.890

 

[Unitrunker2]

@EmergencyResponseWatch How far are you from site 10?

 

[EmergencyResponseWatch]

I don't see 142.485 and 142.185 listed for the Harrowsmith site. Do you see any Napanee talkgroups pop up at all? Try programming Denbigh Site 15 and see what happens.

010 (A)	Harrowsmith (HARROW)	Frontenac	141.540	141.720	141.930	142.095	142.260c	142.395	142.590c
			142.995
011 (B)	Mountain Grove (MTNGRV)	Frontenac	141.360	142.170	142.245c	142.455	142.845
012 (C)	Mount St Patrick (MTSPAT)	Renfrew	141.195	141.495	141.555	142.650c	142.920	143.145c
013 (D)	Pembroke (PEMBRK)	Renfrew	141.435	141.675	142.125	142.380c	142.710c	142.950	143.970
014 (E)	Demorestville (DEMOVL)	Prince Edward	141.195	141.435	141.690	142.320	142.515c	142.620c	142.740
			142.980
015 (F)	Denbigh (DENBIH)	Lennox and Addington	141.390	141.705c	142.230c	142.335	142.545	142.890

We've now attempted to pick up the Denbigh Tower, but the control channels do not pick anything up. Unless the control channels have changed, which I doubt, but they don't appear to be good for us.

 

[EmergencyResponseWatch]

@EmergencyResponseWatch How far are you from site 10?

We're about 25 minutes travel time from the Harrowsmith Tower.

We have a perfect health status when we connect to the control channel for this tower.

 

[Enjoi19]

Do you have the proper band plan loaded?

 

[EmergencyResponseWatch]

Do you have the proper band plan loaded?

I'm going to say probably not.

 

[Enjoi19]

View attachment 186069
I'm going to say probably not.

Base - 141.01500
Lo - 380
Hi - 6
Spacing - 15.000
Slots - 1

You will require this for it to function properly. Probably a chunk of your issue. You may need to nuke the existing LCNs with 00's that probably populated.

 

[EmergencyResponseWatch]

Base - 141.01500
Lo - 380
Hi - 6
Spacing - 15.000
Slots - 1

You will require this for it to function properly. Probably a chunk of your issue. You may need to nuke the existing LCNs with 00's that probably populated.

Would you be okay if I sent you a message?, you seem to know what you're doing compared to us.

 

[Enjoi19]

Feel free to continue the questions on this thread as I may respond slowly and others can jump in if possible.

 

[EmergencyResponseWatch]

Feel free to continue the questions on this thread as I may respond slowly and others can jump in if possible.

Well the good news is, after setting your band plan in place I have finally heard a brief communication between a Juliet Unit and Dispatch.

 

[Aviator747]

I am using UT2.2.0.26

I do not have anything under band plan. I set my signal vfo to 142.260 "site 02", it pulls in LCN's. I take the LCN number and go here: Fleetnet inputs wanted I find the LCN number on the list and then take the frequency beside it and enter it into the frequency spot when clicking on the LCN number in UT. I then listen away. I use one sdr dongle with two vfo's.

 

[jets1961]

So can someone tell me what system is active out here in Prince Edward County, the old FleetNet or the new Phase II system (or both)?

 

[mikewazowski]

LMRN is still being built out in Zone 2.