Hello everyone coming from the Tait world in Moto world I know how to program P 25 on those programming P 25 on the VP 8000. I can transmit but cannot receive. I have all the NAC codes right trying to figure out what I am doing wrong to be able to receive on the P 25.
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
Vp8000 P25
- Thread starter Cole449
- Start date
K7UDZ
Member
- Joined
- Oct 28, 2021
- Messages
- 95
- Reaction score
- 69
If the frequencies are correct, then use an SDR to inspect what you’re actually transmitting. Odds are you have something configured wrong (hard to tell what it could be, and you didn’t give a complete description of the symptoms), and an SDR would show what your configuration is on the tx side. Start by getting simplex working first, then move on to duplex.
Post your codeplug
Similar threads
