SDS100/SDS200: What Will Be The Best Way To Program This Into My Uniden SDS100?

[JASII]

The school district that I live in is moving from a UHF 460 MHz Capacity Plus system to 800 Mhz Capacity Max system.

I have no experience with Capacity Max.

It looks like they have two licenses for it under WSEB200 and WSEB202.

I have programmed those frequencies in conventionally to see which of them are active.

Last week I heard what sounds like a home/rest channel on the following frequencies:

854.7625

855.1375

855.4125

856.3125

This morning there is nothing on those, but they might be working on it right now.

Color Code 0 is used on all of those. Sometimes the Digital Type is DT3 and other times it is CON. There are even a few times it shows CAP.

I think all I can do right now is program it in as a MotoTRBO Trunk System, let it run in the ID Search Mode and see what I hear.

I have created a different site for each of the 11 locations listed on the FCC license.

Is there anything else I should be doing to monitor this system?

 

[tvengr]

You will need to go to Analyze in the scanner menu and use the LCN finder. You need to enter the LCN's for the frequencies in each site for the system to trunk track properly.

 

[dave3825]

Do you have any dongles and DSDPlus? That would make things easier.

 

[JASII]

Do you have any dongles and DSDPlus? That would make things easier.

I don't, yet, what would you recommend?

 

[dave3825]

I have nooelec, Airspy and Hackrf. All will work but for just snooping and mapping a system while also using a scanner, nooelec or rtl sdr blog. Even orange flight aware dongles are good. All depends on the end goal, spread of freqs and software being used. So much variation.