I am having my tail handed to me trying to configure my radio to do Non-affiliated scanning. I have added the p25 table and everything I found in a video for setting up a XG-100, but I am unable to receive anything on any p25 phase 1 or 2 configuration. Not sure where I have messed up and so far YouTube has been no help to set up the XL-200p for nas.
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
Xl-200P Non-affiliated scanning
- Thread starter KR4DFT
- Start date
Give me a few and I will grab some screenshots if you know what to look for. I will have to check but I'm sure I put them in as it shows in this table.
Attachments
Here's what I have in RPM for my IDEN table
Attachments
AES-256-Encryption
Based in the US, always nationwide
One thing im not 100% sure on it, but have been told is make sure you check data inhibit. If not it will send CC data. Same with obviously never for affiliation.
100%. I would also uncheck "Calls" on each TG. From the RPM Help:
Calls
This control enables or disables individual calls while on this group.
Checked: The radio will transmit or receive individual calls while on this group.
Unchecked: The radio will not receive or transmit individual calls while on this group.
Default: Enabled
I have that checked and still doesn't get anything.
Calls is unchecked.
AES-256-Encryption
Based in the US, always nationwide
Check band plan. Check wacn. Are you doing enhanced cc or fixed pro scan?
The WACN is BEE00. I am attaching a screen shot of what I think you're asking for the pro scan.
Attachments
AES-256-Encryption
Based in the US, always nationwide
Tell you what. Send me a message and I can take a look at your mission plan and find the issue.
Sent you a message.
Similar threads
