• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

XPR 7550 Scan List

Status
Not open for further replies.

VMaggio1

Member
Joined
Jan 29, 2010
Messages
22
Location
NJ
Hello All,

I am new to programming the XPR. I have all analog channels programmed into 3 different zones and I have the side buttons set to "Scan On/Off" and I have the channels selected in Scan List 1 yet when I write it to the radio, and press one of the side buttons, it does not scan....Any ideas?


Thank you,

Vincent
 

VMaggio1

Member
Joined
Jan 29, 2010
Messages
22
Location
NJ
What a DOPE I am.....thank you KG4INW.....I feel so embarrassed now. I was looking at each channel individually and not as a whole in the zone selection...Thank you!


-Vincent
 

KG4INW

Member
Joined
Apr 9, 2009
Messages
1,366
Location
Midlothian, VA
Glad that was it. We've all been there before! Motos have so many nuances in the way they're setup sometimes.
 

mikewazowski

Forums Manager/Global DB Admin
Staff member
Joined
Jun 26, 2001
Messages
11,023
Location
Central Ontario
The TRBO CPS is unlike anything Motorola has ever written before. Real PITA to use and easy to make a mistake that results in nothing being heard.
 

phillydjdan

Member
Joined
Jan 27, 2011
Messages
1,682
Wirelessly posted (Mozilla/5.0 (Linux; Android 4.0.4; LG-MS870 Build/IMM76L) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/34.0.1847.114 Mobile Safari/537.36)

I agree, Mike!
 
Status
Not open for further replies.
Top