• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

XPR4550 Repeater Question

Status
Not open for further replies.
Muxlow

Muxlow

Super Secret
Joined
Aug 16, 2005
Messages
1,647
Location
Middlesex County
Ello RR!

Is there a way i can make a XPR4550 work with a RICK to a CDM1550LS+/CDM750/CM200?

Currently have 2 CDM radios connected and wondering how i would setup the XPR for this
 
W2GLD

W2GLD

Active Member
Premium Subscriber
Joined
May 20, 2003
Messages
605
Location
Michigan
You can indeed do this, but for analog only or a single time slot digital repeater as well; as it lacks the logic to map timeslots other than passing simplex data from slot 1 to slot 1. Just wire the pin outs between the two radios, program them for flat audio on the accessory connectors and go for broke. However, would recommend you just get an XPR8400 repeater instead or continue using the CDM series radios for this application, as the XPR radios offer you zero advantage in this setup.
 
Status
Not open for further replies.

Similar threads

G
XPR4550 stuck on FlashZap Bootloader Screen
Replies
2
Views
266
mikewazowski
mikewazowski
J
XTL1500 800 Patch to Icom F5021
Replies
4
Views
414
jayhawkfirearms
J
kb1ejw
NX-5800 mic question
Replies
2
Views
162
kb1ejw
kb1ejw
I
Ventura County Sheriff Lockwood Valley Repeater
Replies
1
Views
222
LZJSR
L
A
MCS2000 Repeater Project Help
Replies
0
Views
154
atlas_tk11
A
Top