• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

XTL5000 control question

Status
Not open for further replies.

dbestfirefighter

Dozer
Premium Subscriber
Joined
Jul 29, 2004
Messages
274
Location
Oklahoma
Does any one know of any software to control an xtl5000? Control not program. I need to remotely control an xtl5000 for patching purposes.
 

AES-256

Member
Joined
Aug 16, 2004
Messages
119
Sy Tech Corporation's RIOS system will handle your needs. Several agency's around Washington D.C. have this sytem up and running with remote control on all radios. XTL5000 W-7 and O5 heads are supported.

http://sytechcorp.com/new_site/SytechCorp/SyTechCorpXY/CDR02.asp

Remote Radio Control – RIOS High-Density Interface allows the RIOS operator to remote control “front-panel” radio controls front the local RIOS Server as well as remote RIOS locations. Remote Control is a permissions base feature determined by the system administrator.
 

hatzolahCW

Member
Premium Subscriber
Joined
Sep 28, 2012
Messages
14
Location
NY
Hi, looong time since last post... But I'm looking for this software but the link dues not work anymore... Anyone to help?
 
Status
Not open for further replies.
Top