Yaesu frg-9600

[jf4164]

I have a Yaesu FRG-9600.
The display has gone out--otherwise radio works perfectly.
Anybody knowwhere to send it to to get repaired or any hints??
You can reply here or by private email at: jf4164@yahoo.com

Thanks

John Fulford--WA4VPY
South Florida

 

[Trekker65]

I have a Yaesu FRG-9600.
The display has gone out--otherwise radio works perfectly.
Anybody knowwhere to send it to to get repaired or any hints??
You can reply here or by private email at: jf4164@yahoo.com

Thanks

John Fulford--WA4VPY
South Florida

Welcome to Yaesu.com



For Technical Support or Customer Service call, (714)827-7600 between 8AM – 5PM PST

For Parts Department call (714)827-7600 (8AM – 5PM PST)
Before sending your radio for repair, please contact our Customer Service Department by telephone (extension 1300) or at the e-mail address below. Verify that warranty or billable service is available for your radio. To send in your radio for repair, please pack it carefully. Use the original packing materials, if available, and place it inside an additional box. Ship via UPS, preferably. Insure your shipment for the full replacement value. The shipping address is:

Vertex Standard USA
Attn: Amateur Repair
10900 Walker Street
Cypress, CA 90630

Please include a cover letter and describe the problem(s) you are experiencing in as much detail as possible. Provide your daytime telephone number, return shipping address (not a P.O. Box number), and your e-mail address, in case we cannot reach you via telephone.

To follow up on status of a repair, you may also send e-mail to customerservice@vxstdusa.com.

 

[ChrisP]

I have a Yaesu FRG-9600.
The display has gone out--otherwise radio works perfectly.
Anybody knowwhere to send it to to get repaired or any hints??
You can reply here or by private email at: jf4164@yahoo.com

Thanks

John Fulford--WA4VPY
South Florida

Hi John,

I had the same problem with my FRG-9600, but it was nearly brand new when it failed. It went back to Yaesu and they turned it around fairly quickly, It turned out to be something in the high voltage supply for the display. I have no idea if they still support this receiver or not, but it's probably worth a try.

- Chris

 

[kb0nly]

I highly doubt your going to get any help from Yaesu for that older model, the FRG-9600 is up there in age. I would get on the Yaesu email reflector and post about it there, i seem to recall it was a component failure as well. A schematic and a soldering iron is all its going to take to fix it.

Contact Yaesu first just in case, never know!