• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

APX APX R32 SW

N9JIG

Sheriff
Moderator
Joined
Dec 14, 2001
Messages
5,601
Location
Far NW Valley
I was told that there is an issue in R31 of the APX software that caused loops on some radios and not to use it, but use R32.xx.xx. I checked MOL and the latest version is R31.00.01 from August 2023. (There are older versions back to R23.xx.xx as well.)

Is there an R32.xx.xx and perhaps it just isn't showing on my MOL account?

(Edit) After reading the release notes apparently the ".01" version fixed the loop issue, perhaps the source saying there was an R32 version was wrong.
 
Last edited:

GTR8000

NY/NJ Database Guy
Database Admin
Joined
Oct 4, 2007
Messages
15,495
Location
BEE00
R32 has the fix, not R31. They claimed to have fixed it in a later version of R31, that proved false.

Anyway, you need to use MyView to download the latest CPW/FW, not MOL, which is being slowly done away with.

By the way, it's not the "software" that causes the issue, it's the firmware. If you're concerned about it, go to MyView and download both CPS R32.00.00 as well as FW R32.03.00 and upgrade the radio.
 

ElevatorsAndRadios

yarewesog
Premium Subscriber
Joined
May 26, 2017
Messages
124
Location
SoCal
I was told that there is an issue in R31 of the APX software that caused loops on some radios and not to use it, but use R32.xx.xx. I checked MOL and the latest version is R31.00.01 from August 2023. (There are older versions back to R23.xx.xx as well.)

Is there an R32.xx.xx and perhaps it just isn't showing on my MOL account?

(Edit) After reading the release notes apparently the ".01" version fixed the loop issue, perhaps the source saying there was an R32 version was wrong.
I do not think the others here understand your question entirely... I think you are confused because when you look on MOL, the latest version you see available for download is 31. You need to go to MyView, which has 32... for some reason I was only able to find 32 on MyView and not whatever other page has your list of entitlements and subscriptions. I hope this helps.
 

MTS2000des

5B2_BEE00 Czar
Joined
Jul 12, 2008
Messages
5,246
Location
Cobb County, GA Stadium Crime Zone
MOL is deprecated and MyView and the new Customer Portal are the path forward. If it's not on MyView, check the subscription box and see if you have it added, if not, open a case and get customer support to add it.
 

GTR8000

NY/NJ Database Guy
Database Admin
Joined
Oct 4, 2007
Messages
15,495
Location
BEE00
I do not think the others here understand your question entirely... I think you are confused because when you look on MOL, the latest version you see available for download is 31. You need to go to MyView, which has 32... for some reason I was only able to find 32 on MyView and not whatever other page has your list of entitlements and subscriptions. I hope this helps.
I think I understood his question entirely and gave the correct answer, which you then parroted. Perhaps you're the one who is confused? :unsure:
 

N9JIG

Sheriff
Moderator
Joined
Dec 14, 2001
Messages
5,601
Location
Far NW Valley
I do not think the others here understand your question entirely... I think you are confused because when you look on MOL, the latest version you see available for download is 31. You need to go to MyView, which has 32... for some reason I was only able to find 32 on MyView and not whatever other page has your list of entitlements and subscriptions. I hope this helps.
Yes, that is exactly as GTR8000 indicated. The Chief has been advised. It was still MOL when I retired and the account was still under my former work email. It is up to them for now.
 
Top