• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

DM2600 problem

J

JeJun88

Member
Joined
Jun 7, 2023
Messages
7
Hi,

I have a DM2600 UHF and I'm unable to switch the power (High/Low) on a channel using one of the front programmable(P1...P4) buttons. I'm using CPS2.
I found a work-around by just configuring two channels for the same repeater. One with a fixed High power and one with a fixed Low power however this doubles the number of configured channels. Now, when I switch channels the power switches as is indicated on the display and on my power meter.

I tried to configure all programmable buttons (short and long press) with the same High/Low function but this did not solve the problem.
I emptied my codeplug and just configured one channel but still no luck.
I upgraded the firmware to vR02.21.01.000 but this did not help.

I now would like to try someone else his/her DM2600 codeplug. Is there someone that is willing to share a DM2600 UHF codeplug?

Thanks
73s
Joris (ON9CJA)
 
J

JeJun88

Member
Joined
Jun 7, 2023
Messages
7
Hi,

I just found what was causing this issue. The FPP (front programming password) feature was disabled and is blocking certain actions on the front panel like explained in this post: Xpr2500 scan list
Go to the Configuration - General - General Settings and in Front Programming Password change Mode from Disabled to User.
Now I can switch the radio its output power using a front panel button.

Best regards
Joris
 
You must log in or register to reply here.

Similar threads

K
Need a codeplug for a UHF Motorola Radius M120
Replies
12
Views
659
petnrdx
petnrdx
T
XPR3500E No Way To Exclude Empty Channels From Ch Selector
Replies
4
Views
375
tropiradio
T
D
Kenwood: Kenwood Ts-60
Replies
6
Views
408
Dav21g
D
kayn1n32008
Club Repeater Room
Replies
6
Views
903
kayn1n32008
kayn1n32008
N9JIG
Fun with the Railroad Astro Spectra
Replies
19
Views
2K
AM909
A
Top