cp200d

Morning, all. I am the plant engineer for a small factory and we're exploring programming scan mode into our CP200D radios. The current setup has a repeater and 5 talk-around channels. Unfortunately, our dealer retired during the pandemic and we haven't established a relationship with a new one...

Hello I am new here so if this is the wrong forum to ask let me know where I can go. We'll start with the background information, I work for a small railroad that uses radio activated crossings. On our line we have 9 crossings with unique DTMF codes for activating and deactivating the gates...

Alright folks... I've got a few doozies here. I'm on the hunt for an inexpensive VHF radio. Found an XTS2000 on eBay that I really like, however I'm having some hesitations about pulling the trigger -- As far as programming it, that is. I cannot find the programming software for it anywhere...

I have programming software for both models. I copied all frequencies on RDU4100. I wrote the frequencies to CP200D and it transmits to RDU4100 on 464.50000 but does not received on 464.50000. What am I doing wrong or what setting do I need to consider on CP200D programming software. I can...

At my new job we use Motorola cp200 and cp200d uhf radios. I still have my Motorola xts5000 from my prior job. The model xts i have according to the frequency chart / model number identification is - Position 4 - S = Frequency Band470 to 520MHz Position 8 - Primary Operation = Programmable...

Hi all, I have a CP200d that is the analog version and recently thought about getting the digital upgrade for it. There is just one problem. After the upgrade you are supposed to upgrade the firmware and the radio already has 1.1.30 so there is nothing to upgrade to. As far as I know there is...

So Motorola came out with a new CP200d design because the PTT would constantly break and they were *probably* tired of getting complaints from people. The new design has the PTT stick out a little more which makes it easier to press and it seems they reinforced the spot where the PTT would break...

So I was messing around with my CP200d (analog version) and wondered if there was a way of "tricking" the radio into thinking it is digital capable? If not does anyone know how much said upgrade would cost? Thanks

Hello All, My company rents Motorola radios for TV, Film, and Live Events. We have a large stock of analog CP200's and have also bought a couple of hundred CP200D's when the CP200 units were discontinued. Since we started to make that change our radio business has suffered. We've had to swap...

I'm attempting to program a CP200d and im having trouble finding the driver and getting the radio to read. I get error number 1687 "unable to detect applicable device"

Anyone know if there's a way to turn the Talk Permit Tone off on the CP200D? Google hasn't been much help. Thanks

I am a manager at a small railroad in California. We switched to MotoTrbo digital in early 2015 and are experiencing significant issues with missed calls. We operate on a set of talkaround VHF frequencies; one digital channel for park operations, one digital channel for our narrow gauge rail...