prograamming help

Here is a picture on all of the information i have about the talk groups i want to program into my TYT-380. For example if i wanted to use the EMS talkgroup how would i do that? I already have the FM frequency for it but i only hear the dispatcher. I want to hear everything. How would i do this?

Last January I bought the Whistler TRX-1 and was excited to get back into scanning, what an absolute letdown it has been. Loaded the software and thought I had everything programmed right but never and I mean never picked up one single radio call. After months of doing every I could think of I...

I picked up two MT2000s from a friend a few months ago and I just now got around to attempting to program them. I just got RSS working via the "Rufus DOS Stick" method tonight and immediately ran into this issue. I went to read my radio after the sitting through the "reading code plug blocks"...

This may have been ask before, if so I apologize I’m new. I purchased a Whistler TRX-1 few months ago and as much as I love it, I struggle to get it programmed right. I have the software installed and did all that, and used the zip code thing to program my area but the problem seems to be...

Hey guys I need some help on a question about programming an XTS 3000 radio for scanning. What makes its to where the radio will not affiliate while programming the radio? How many personalities and scan list do I need in order for the radio to not affiliate?

Asked a few questions on the purchase help threads and finally got a bcd436hp. I selected this model because my area is on APCO 25 phase1. I have the DMR/moto update and have tried importing the RR data to a new favorite list and I am showing it is scanning local channels but I have heard no...

yes when I edited my scan list to add zone 8 channel 1 to scan it will shows it in the scan list after I write the radio but wont work but all the other I put in work for some reason it the only zone 8 and channel 1 also when I am on that zone 8 and channel 1 I can not even put the...

I recently got an Advisor II pager and I have no idea on how to program it. I was hoping someone here could help me program it to go off for certain department frequencies/tones. Thanks, Matt

I just recently purchased a unified bcd536hp and I used the sentinel software to program the p25 system to my scanner. For some reason whenever I hear a transmission it comes in very patchy sounding and then clears up. It only clears up sometimes. Most transmissions can't even be made out. Any...

I have had a Pro-18 for about two years and it had been working fine, or so I thought, anyway. Recently my local law enforcement agency switched from EDACS to P25 and disappeared from the air. I checked the pages here and found out about the conversion, downloaded the latest database, and made...

had these for years usually program from back serial of xp machine using one connector in serial computer and the motoropla clamp that goes onto the contacts at side of radio, using the cps 4 and I purchsed 6 a while back, the cable seems connected properly the port is showing when asked to read...

I've tried to program Hanover County in as both P25 and Motorola and had no luck and no signal using either method. It SHOULD be a P25 system. If someone could walk me through manually programming Hanover, I would really appreciate it. Maybe I screwed a setting up by accident but I'm about to...

Having a problem with the computer recognizing the radio. The software is CE115 1 cable from USB to Radio When I try to upload the radio into the software, it says to turn radio on. When I do it does not recognize it. Ive tried switching the com ports and still nothing. Any help would be...

I have recently acquired some TK-3180 radios and the are password protected as far as reading/writing the radios. Can someone advise me on how to get past the passwords?

I purchased a HT1250 and it came with the programming software r06.09.06 and I am lost. I have my data cable drivers installed but it seems as if I dont have everything installed from disk to run the CPS. I am not real computer savoy but I cant figure this out. Also I took the radio to a local...