trunking programing help

Any advice on listening to a 7/800 P25 Phase I system? I won't need it to scan as there's no need for me to have it scan. Just like to program a few local talkgroups and switch between them as I like. How difficult would this be to program for it to not affiliate? P.S. I have experience on...

I've previously been monitoring a P25 trunked network (NSW Government Radio Network Trunking System, NSW Statewide and ACT, Multi-State - Scanner Frequencies) in my state using the non-affiliate scan method. I.e. I created the actual trunked channels and placed them in a scan list linked to a...

Can someone please post the steps in detail of how to program a XTS5000 to do Non Affiliate Scan (NAS) using the Hidden Talk Group (TG) method on a P25 Trunked System? Nobody posts this anywhere and it's too confusing so i'm reaching out to help myself and others. Thank You!

So im pretty new to scanning and i bought my first scanner, which is a Uniden BCD325P2, i needed this one for the purposed to scanning the fire radio channels where i live which is orange county, CA. This place uses a mega trunked network, with a million or so channels. I know because i use it...

I'm in northeast Oklahoma. I'm looking for any information others may have about the Broken Arrow Communications Regional P25 System. for years BAFD has been encrypted. They are Harris Opensky. I've herd they are migrating away from it and are going to the new Harris XL-200p. some of their...

Idk WTF is wrong with my scanner! Yes i have a P25 Phase 1&2 capable scanner. I can't seem to get a goddamn PEEP out of it from the NYS Metro-25 system. Not even from the MTA PD talkgroups or NYC Sheriffs. I've tried many combos of setup in the EZScan programmig software (i have a PSR-800)...

I can't seem to figure kut which parts I need for programming my GRE PSR-800 trunking scanner. By parts I mean, trunking tables, fleetmaps, etc. I am trying to program the New York City DOiTT (UHF) system in New York City which is a Motorola Type II Smartzone system with Analog and APCO-25...

Hi Folks! Me again asking... I'll try to be specific, because I think maybe I have a fool question. I have an amazing Uniden BCD436HP and In my country there are not information about the use of frequencies by public services (i. e.) and the only way to find some radio activity is using teh...

Just got a Pro-94 and am adding frequencies to it. Wanted to add some trunk groups for AZ but I find myself a bit confused as the listings here Maricopa County Trunking System, Maricopa County, Arizona - Scanner Frequencies show decimal listings as well as frequencies but I have zero clue how...

Good morning, first off I want to thank everyone that have given me so must help on here. Ive bought a new PRO 652. Im trying to understand how digital trunking scanners are programmed. Im working with Monroe/Union county NC which changed to a digital trunking system recently. 15 years ago I...

Greetings All, I was visiting Maine a couple of weeks ago. I did some MSCOMMNET scanning with a 436hp and a PSR-500. I encountered an interesting problem monitoring in my mother's house. While monitoring the Cook Hill site, the 436hp consistently missed most of the transmissions, catching only...

Queston: On my BCT-8 I can get OCPD (Oklahoma City Police) in trucking using the State mode and I get something like, OK 53 744 on the screen. Is there any way, mod or otherwise to save those numbers? The 800 frequencies and talk groups that radioreference.com has listed does not pick up...

I have been trying to program my scanner for a while now. I live in Westchester county NY and trying to propgram the Westchester County UHF trunk system. The two base frequencies are 470.000 with a 380 offset and a 12.5 spacing, and 476.000 with a 520 offset and 12.5 spacing. I enteretd the...

I am looking for a "walk-trough" on the KPG-25d software for the TK-940 (800mhz) Radio. I have been trying to get it right for a while now, but to no avail. Does anyone have a "Template" that I could look at, to make sure that I am getting all the right information in the right places. Or...

We have Kenwood Trunked Radios at work and I bought a Motorola HT1250 LS I transferred the information from the Kenwood to the Motorola software but I cant get the channel to work can anyone help with the process of making sure the information is being copied in the right spots since the...

I just worked with Radio Shack who were good about exchanging my PRO-164 for a PRO-106 because the Police Dept in Davenport, IA have already gone digital. I am still very new to this but I now have the programming cable needed as well. I have done some research as far as the frequencies used in...

I got my first scanners capable of rebanding (Pro 163 and Pro-164), and have updated the firmware... While I've been very familier with conventional comms for a very long time...trunking is new to me... I looked in the database here, and while all I want is LAW, FIRE, FORESTRY & EMS, what I...

I’m having a problem fine tuning my scanner for my uses. I live in Alameda County, CA. I’ve figured out how to programs the frequencies for the city of Hayward. Since it’s just simple frequencies’ and a CTCSS Tone Code. But for other cities the all share on Alameda County’s' Motorola Type II...

Hi there so I used a uniden scanner for many years until it broke and I just got a PSR-310. I love everything about it HOWEVER when it comes to programming a trunked system I have NO IDEA what I'm doing. I have read the manual and have read multiple forums online I even tried searching videos on...

I have 851.2750 that always has a shhhh sound and when the scanner is in manual can hear part of the conversation, 852.2875 shirps every ~10 sec and when the other frequency 851.2750 stop to hear the conversation this 852.2875 completed well, dont know how to program the scanner (MOT,ED,LTR) if...