vertex

I have a vx7200 that is 380-450MHz I was able to get it to go to 462.500 for GMRS. Could it in anyway effect the radio?

I have an vmde-200 installed in my vx-929, the radio decodes mdc1200 but doesn't decode DOS mdc1200? Is there anything I can do to make it work. Plus when it decodes mdc it makes a chirp instead of the squawk how can I fix this as well?

need some advice please, i have some VX-426 radios and recently acquired VX-2200. I programmed one of the VX-426 and works great, i then went on to do the other 3 and all 3 of them are all having the same problem: When you press the PTT the screen goes blank for a second then returns to normal...

Needing apparently some ce47 software for some fire dept VX-2500U radios to narrow band them. Unable to locate any software via the outdated radio software library. If we need something different, or something different will work, could someone shoot me a PM or message and steer us in the...

Hello i have been to this site a couple of times but never register. I have a question ,I have a Vertex VX6000 and is the SVC-49 the appropriate software to program frequencies . I have the software installed in my computer but it work program . I fell like it tunes the radio only. Thank You.

Hello all, I'm having a problem with the radio. It seems that first second or so of a received signal is getting cut off. It happened when the radio is in both scanning and not scanning. I've tried the power saving functions both on and off with no success. Just wondering if anyone has some...

Trying to [re]program my VX-4000 with CE49 software, an old laptop running at 700Mhz with a fresh install of Win XP Pro. Got the radio-to-USB cable from Kawamall. Com port is set to match in Device Manager and CE49. Radio is in PC Clone mode. When I try to read the radio it starts to cycle...

I am in need of some help/assistance with the programming of some old Yaesu/Vertex FTH-2008 portable radios. I cannot seem to get them to communicate with my computer. Any suggestions/information would be greatly appreciated! Thanks, Brandon, K7KLA

Here are some photos of my Crown Vic. police car. Let me know what you think! Pictured is a Vertex 4204 and a Motorola HT1000, I also have a XTS3000 and a digital scanner in the car.

In need of CE-115 software. Lost my original disk and need to change radios for our rescue squad for the narrowband switch over. Can anyone help me locate this software? Thanks for all your help.

Hi Guys, I have this problem with my brand new radios,2 VX-2200.Well the problem is about the comunication from PC to Radio. Naturally I'd like to inform you about my configuration: RTX : VX-2200E USB programming interface : FIF-10A Adapter cable : CT-104A SW : CE82 ver.1.10W Ok,when I...

What program software versions programs these 2 radio's vx354 and vx180v. New to vertex

I am having trouble updating the FIRMWARE on several VX459 portables. I have several portables across both bands. I am trying to load FIRMARE 1.12. I am using the FIF-10A and the CT106 cable. The radios that I have trouble loading the new FIRMWARE into, all currently have FIRMWARE (1.05 and...

can i get it programmed for a low band then re programm it for a higher band?

When I try and download data from the radio onto the computer, I get the please wait screen and then nothing happens. I have left the radio connected for 10 minutes just to see if it was a slow download but nothing. The CE19D has not frozen because I can hit esc and it will cancel the function...

Does anyone know anywhere I can buy a "Shoulder Mic" for a Vertex VX-150 Radio. I work for a Public Safety Department at a College. I need a "Shoulder Mic" to be able to perform easy. Thank You

I have a VX-180 set up as both a pager and a radio, when i set the radio to scan it often jumps rite back to page or it will scan untill a transmission is heard than will jump to page and stay their untill i manually reset it to scan. other times it will continuously scan without any problems. i...

Hi- I am using a UHF vx-924 and hoping someone out there can help me. I am looking to set up scanning so that I can scan channels in multiple zones and have the selected channel be the priority. Currently I am using the "Follow-Me" scan and it works fine for 1 zone scanning. As soon as I...

I was wondering if theres any way to use DTMF signaling to resemble Modat. I was thinking if DTMF Tone #6988124 going at 50ms would sounded close to Modat. I know this sounds stupid but I was just curious, any advise would help. Once again I agree this a stupid Question :) :) :)

How can i update the firmware on my vertex vx-800 on my own? I have the programming software but cannot find the firmware update. Anybody know where i could find it? Also what are the pros & cons of updating the firmware of the radio. The most important thing I like most about the VX-800 that...