96 vs. 95 talk group ID's

[quatlo]

TG's on my Pro95 show up as entirely different numbers on my Pro96, and they both work. Example:

From the Fayetteville NC TRS

Pro96: EVENTS 7089-1
Pro95: EVENTS 63056

The ID shown for the Pro95 is from the database here.

Searched and didn't find anything about this. Why is the hyphen and different value for the same ID displayed on the Pro96? If a new ID (different value with hypen) is found in open mode on the 96, and you want to use it on the 95, how's that work? (I have Don's Winxx Data Converter program.)

 

[FPO703]

It looks like on the PRO-96 you have it set up as a Type I system instead of Type II system.

 

[quatlo]

It looks like on the PRO-96 you have it set up as a Type I system instead of Type II system.

How do you change that? Both tables are set at normal. Using Win96. Oh by the way, thanx in advance to all for putting up with this dumb question.

 

[FPO703]

Make sure the 'type' is Type II and not Type I or IIi.
If looks like you have some sort of fleetmap in there.

Can you attach your win96 file for this system and I'll look at it?

 

[quatlo]

Forgot what to change to be able to post a .p96 file here, but here is a screen grab of the Fay TRS bank:

 

[FPO703]

On the section above the TGs, change the S01 to S00 in the section 7 for the fleetmaps.

 

[quatlo]

That did it, changed everything back to normal. Thank you very much.

 

[FPO703]

No problem. I've done that a few times myself. Sometimes you can look at a problem for hours and have no results. But, let an outside person look at it, and, they find the answer instantly.