Antenna for SDS100

[xzebra007]

Hi - Looking for a good aftermarket antenna for a Uniden SDS100. I have heard good things about the Remtronix, however it appears they have two different models. Any ideas what the difference is (REM 810S & REM 820S). Any other suggestions?

 

[sallen07]

Hi - Looking for a good aftermarket antenna for a Uniden SDS100. I have heard good things about the Remtronix, however it appears they have two different models. Any ideas what the difference is (REM 810S & REM 820S). Any other suggestions?

Remtronix REM-800B, Remtronix REM-800S, Remtronix REM-820S Scanner Antenna

The REM-820S is specifically designed for the SDS100.

 

[522]

Also, mind you that the Remtronix 810/820 are for the 700-900 MHz frequency range. I have one on my SDS100 and it is a great antenna.
I also have Diamond SRH77CA for when I want to listen to things outside the 800 ish range, as its much more wide banded.

So maybe depends on what you're primarily wanting to listen to.

 

[WB9YBM]

antenna location is definitely part of the equation, also: a good antenna in a bad location versus a bad antenna in a good location work about the same. Ancient proverb: "Height is might" as far as getting the antenna above the "ground clutter" plus paying attention to the quality of the feedline (especially on longer runs).

 

[jonwienke]

Best antenna depends on what you listen to most. What systems / frequencies do you currently monitor?

 

[ad5kl]

I haven't really used the stock antenna, since my SDS100 also included a Remtronics 820S. A lot of times, I don't even connect the truck antenna to it because that little antenna receives so well. But most of our stuff around here is 700/800, not much left on VHF anymore.

 

[tvengr]

Any ideas what the difference is (REM 810S & REM 820S).

The REM-820S has a rubber O-ring to maintain water resistance. I second the 820S for 700/800 systems. It is a huge improvement over the stock antenna.