I'm watching 3 jurisdictions rebuilding their TRSs from Smartzone to Astro 25 infrastructure. Two systems currently use a single simulcast zone of 10 subsites sites, while the third use two zones of >= 10 subsites per zone. I know that SmartZone has a limit of 10 subsites per simulcast zone (maybe 11 with some trickery,) but Astro 25 allows more sites per simulcast zone. The two single zone Smartzone systems are being rebuilt to single zone Astro 25 with 22 subsites - I'm curious if 22 is now the upper limit of subsites per simulcast cell, or is this just a coincidence? Note that the third system is retaining the two simulcast site design, but now has 33 subsites in total.
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
Astro 25 Simulcast: max number of sub-sites
- Thread starter maus92
- Start date
- Status
An ASTRO 25 simulcast subsystem can have up to 32 subsites with up to 30 repeaters per cell. That limit applies to all M cores.
In case you're wondering, an M1/M2 core can support up to 24 non-simulcast sites (ASR) with up to 28 repeaters per site, however the maximum amount of channels systemwide is 300. The M3 core can support up to 150 non-simulcast sites with up to 28 repeaters per site, with a maximum of 1,000 channels per zone.
In case you're wondering, an M1/M2 core can support up to 24 non-simulcast sites (ASR) with up to 28 repeaters per site, however the maximum amount of channels systemwide is 300. The M3 core can support up to 150 non-simulcast sites with up to 28 repeaters per site, with a maximum of 1,000 channels per zone.
M1/M2
1 zone
300 channels per zone (trunked or mixed trunked/conventional)
24 ASR with 28 RF channels per
32 simulcast subsites with 30 RF channels per
M3
7 zones
1,000 channels per zone (trunked or mixed trunked/conventional)
150 ASR with 28 RF channels per
32 simulcast subsites with 30 RF channels per
1 zone
300 channels per zone (trunked or mixed trunked/conventional)
24 ASR with 28 RF channels per
32 simulcast subsites with 30 RF channels per
M3
7 zones
1,000 channels per zone (trunked or mixed trunked/conventional)
150 ASR with 28 RF channels per
32 simulcast subsites with 30 RF channels per
RFI-EMI-GUY
Member
- Joined
- Dec 22, 2013
- Messages
- 6,868
There are some practical limitations to the numbers of sites in simulcast mode due to coverage overlap, time differential interference, etc. It is difficult to keep everything in same phase everywhere over a wide area of coverage. Even if you could ideally have 32 sites, changes in propogation such as tropo ducting will smack you with TDI from a distant site.
ILMRadioMan
Member
That assumes the towers are in close proximity to each other, and there are more than one in overlap area.
While that is absolutely the most common application, there are simulcast designs for wider areas, and also underground where there isn't TDI.
While that is absolutely the most common application, there are simulcast designs for wider areas, and also underground where there isn't TDI.
- Status
