Bay County P25 (00A.924B5)

[jake_Braker]

I agree. I wanted to see if it works. First I had problems with the sd card took hours to find something than I reformatted it a few times and couldn't find any old settings cause other hard drive crashed and not able to get all settings from ez scan. I had to make a new everything. Needless to say it may sit in my drawer for ever again.

Depending on what kind of scanner you own (I believe an XT series and P2 series and the ones that work. Someone please correct me) you can run Pro96Com but again, the simulcast distortion isn't your friend

 

[batdude]

The first entries into the RR dB for the P25 Bay County system are now updated/entered.

Thanks for the submission!


doug

 

[bravo14]

Depending on what kind of scanner you own (I believe an XT series and P2 series and the ones that work. Someone please correct me) you can run Pro96Com but again, the simulcast distortion isn't your friend

I have the sds 100 & 200. The psr800 doesn't like the simulcast distortion.

 

[jake_Braker]

I have the sds 100 & 200. The psr800 doesn't like the simulcast distortion.

Ah okay. I didn't know what scanner(s) you had. Just speaking from personal use

 

[jake_Braker]

What is the "teletype" channel used for? I've never heard of such.

 

[Remington12G]

What is the "teletype" channel used for? I've never heard of such.

I believe that is the NCIC/LINK channel for MDT's. Someone correct me if I am wrong.

 

[bravo14]

I believe that is the NCIC/LINK channel for MDT's. Someone correct me if I am wrong.

That's correct on NCIC and check on DL/ID also.

 

[jake_Braker]

That's correct on NCIC and check on DL/ID also.

Okay, I just wasn't sure because up here we call it "channel 2" or operations. Thanks!

 

[bravo14]

Okay, I just wasn't sure because up here we call it "channel 2" or operations. Thanks!

Lots of places are different. Where I use to live they say NCIC. Here all say Teletype. Sometimes on Main you'll hear them running plates too.

 

[Remington12G]

Has BCSO made a full switch over to the new system?

 

[bravo14]

Has BCSO made a full switch over?

Yes since Wed morning. Haven't heard much on channel name or go to certain tg.

 

[Remington12G]

Yes since Wed morning. Haven't heard much on channel name or go to certain tg.

Understood. Thanks

 

[jake_Braker]

Any new updates with the system?

 

[bravo14]

Any new updates with the system?

None so far.

 

[bravo14]

I have a feeling this might take months to get everyone on the new system. So far nothing happening as in no new TG's.

 

[bravo14]

As of about 20-30 mints been having lots of heavy lighting either hitting near the house or close by. I haven't heard much on new system just the basic main and teletype traffic.

 

[bravo14]

We just had 80mph+ winds and heavy rains. Now its about be lighting and haven't heard much just power lines down and some streets flooded.

 

[batdude]

We just had 80mph+ winds and heavy rains. Now its about be lighting and haven't heard much just power lines down and some streets flooded.

wow - be safe up there!

 

[bravo14]

wow - be safe up there!

It did lots of crazy stuff. I drove around and power was out in certain areas and I seen a few RailRoad Crossing arms snapped in two. I even tested out the sds100 at work since we had to replace a motor and was getting good audio and signal with all machines and concrete blocks and metal.

 

[Remington12G]

Little off topic