DSDPlus Can't figure out DSDPlus

far342

Member
Premium Subscriber
Joined
Apr 14, 2024
Messages
85
Reaction score
23
I have two RTL V4 dongles that i usually use with SDRTrunk on a p25 system. Recently I discovered this Nexedge system that I want to monitor. I downloaded DSDPlus and used SDR# with a virtual audio cable and was able to decode the control channel traffic but could not hear any of the calls. The Input and Output devices were set properly. In general I am very lost with DSDPlus and only just figured out how to get it to decode the control channel from SDR#. This is the site I was decoding.
 

mtindor

FMP24 PRO USER
Database Admin
Joined
Dec 5, 2006
Messages
11,671
Reaction score
2,939
Location
Carroll Co OH / EN90LN
I have two RTL V4 dongles that i usually use with SDRTrunk on a p25 system. Recently I discovered this Nexedge system that I want to monitor. I downloaded DSDPlus and used SDR# with a virtual audio cable and was able to decode the control channel traffic but could not hear any of the calls. The Input and Output devices were set properly. In general I am very lost with DSDPlus and only just figured out how to get it to decode the control channel from SDR#. This is the site I was decoding.
You aren't going to hear voice calls unless you tune to a voice channel. Can't do that if you are using SDR? + Virtual Cable + DSDplus.

You can trunktrack with DSDPlus if you use FMP24 + DSDPlus (fmp24-cc.bat and 1r.bat). Do you have the free version from the website, or did you pay $10 / $25 for DSDPlus Fastlane?
 

mtindor

FMP24 PRO USER
Database Admin
Joined
Dec 5, 2006
Messages
11,671
Reaction score
2,939
Location
Carroll Co OH / EN90LN
And, not only do you have to be using FMP24 + DSDplus (or with the free version I think FMP + DSDPlus) you also have to have the two configured correctly to talk to each other.

And (this is important) you should thoroughly read notes.txt, dsdplus.txt and any other txt files in the distribution.

THEN, you have to set up your DSDPlus.networks, DSDPlus.sites and DSDPlus.frequencies files if you truly want to trunk track and monitor the system

Code:
DSDPlus.networks
================
NEXEDGE48,80,"Fleetnet-Silke"

DSDPlus.sites
=============
NEXEDGE48,80,18,"Bald Peter Mtn"

DSDPlus.frequencies
===================
NEXEDGE48,80,18,145,454.625,0,0
NEXEDGE48,80,18,393,461.500,0,0
NEXEDGE48,80,18,735,463.7375,0.0
 
Last edited:
Top