Can't receive any calls

[Janetvnd59]

And they're programmed identically? What if you punch in 151.460 via tune mode, still nothing?

I misunderstood your last post. I hooked up the outdoor antenna to the trx1 and it worked well. So now my question is what antenna should I get for the trx1 that would work other than getting another outdoor antenna for it

 

[Whiskey3JMC]

Why not just get a splitter so both receivers can share the antenna? Yes you'll incur some signal loss but if the received signal is strong it shouldn't make that huge of a difference

 

[Ubbe]

A splitter will have a 3-4dB loss and if you feel that it will be too much then an active splitter can be used, like an Electroline EDA-2400 but see to that you also get the power supply for it as that will make it much easier to use. Get some adapter cables to convert from F connectors to BNC.

Electroline EDA 2400 4Port Cable TV HDTV Signal Booster/Amplifier w/Wall Adapter | eBay

Electroline EDA 2400 4Port Cable TV HDTV Signal Booster/Amplifier w/Wall Adapter

www.ebay.com

RG316 BNC MALE ANGLE to F MALE Coax RF Cable USA-Ship | eBay

RG316 BNC MALE ANGLE to F MALE Coaxial RF Pigtail Cable. Cable Type: RG316. Connector 1: BNC MALE ANGLE. Connector 2: F MALE. Center conductor: Standed Silver Coated.

www.ebay.com

/Ubbe

 

[buddrousa]

Yes but an outside antenna with 3DB of loss with a splitter is better than a factory antenna inside just to test with.