BCD325P2/BCD996P2: CC trunk system p25

[R4bbitSl4y3r]

HI,

Our fire departement has change there channel to ( p25 not incrypted ), my question is can i find there new chanels on my BDC325 p2 in a close call mode

 

[wtp]

if you are basically at the station, yes.
how about some more info, like state, county, town ?

 

[Whiskey3JMC]

if you are basically at the station.

Only applies if the fixed base is at the station, more often than not it isn't. OP needs to find out where the fixed base(s) is (are) or otherwise reply back with specific agency info so the research can be done for them

 

[wtp]

well he could get the inputs !

 

[jtwalker]

if you are basically at the station.
how about some more info, like state, county, town ?

I really don’t know, but I would bet this might get you the input frequencies but not CC or output. 🤷‍♂️

 

[wtp]

i am thinking of a number from 30 to 862...

 

[trentbob]

Original poster, it sounds like your fire department or your county has adopted a new p25 Phase 2 radio system. Using close call to find the frequencies is like cleaning a 25 stall bathroom in an army barracks using a toothbrush.

Unless you give us the state that you're in, the county you live in and your hometown or station number we can't help you.

With that information you supply people can look up in the database and you can program your radio with the entire system. Because of your radio if it's simulcast you might encounter reception problems.

 

[R4bbitSl4y3r]

Original poster, it sounds like your fire department or your county has adopted a new p25 Phase 2 radio system. Using close call to find the frequencies is like cleaning a 25 stall bathroom in an army barracks using a toothbrush.

Unless you give us the state that you're in, the county you live in and your hometown or station number we can't help you.

With that information you supply people can look up in the database and you can program your radio with the entire system. Because of your radio if it's simulcast you might encounter reception problems.

Thanks for the anwser has you can guest im new at this ... so all i go

 

[trentbob]

Thanks for the anwser has you can guest im new at this ... so all i go

Yep, and so your state, county and hometown is what?

 

[R4bbitSl4y3r]

yes so , Canada province New Brunswick county is Madawaska

 

[R4bbitSl4y3r]

Yep, and so your state, county and hometown is what?

yes so , Canada, province New Brunswick, county is Madawaska

 

[trentbob]

Okay it looks like a phase 1 System, I am not familiar with Canada whatsoever. It looks like we're going to need where in your county you are. What's your local hometown. Many parts of that phase one system look like they are encrypted. What is your hometown.

 

[trentbob]

Okay poster, I think you need to go to the Canadian radio discussion forum. This is the system your county is on. Your county alone has 12 sites and their locations. Each site has its own set of frequencies and control channels.

Without more information about where you are in your county we just can't help you here. That's why we ask for your hometown not just your county. I also don't know the geography of Canada and everything is heavily abbreviated.

They will be able to help you in the Canadian discussion forum. Good luck.

PS.. make sure to give them your exact location in the county so they don't have to ask, that's the first thing they're going to want to know. Make sure to give your fire departments name also as talk groups are divided in regions, North east west south.