Cooke Co Trunked System

[ffighter17]

Does anyone have any information on the new trunked system Cooke Co So is going on?? I have seen some new frequencies listed on the FCC website but that is it. I am assuming they are the new trunked system.

 

[nd5y]

FCC Callsign WRUD885 (COOKE, COUNTY OF, TX)

FCC Callsign WRUD885 (COOKE, COUNTY OF, TX)

www.radioreference.com

It looks like a non-simulcast P25 phase II system.
There are 4 sites with 3 channels each. The channels are different at each site.

Scan all the frequencies as conventional FM channels and you will know immediately when it goes on the air.

 

[kd7cao]

Does anyone have any information on the new trunked system Cooke Co So is going on?? I have seen some new frequencies listed on the FCC website but that is it. I am assuming they are the new trunked system.

Cooke County is coming on to the Denton County CORE. They will have a new multi-site P25 system.

 

[ffighter17]

Cooke County is coming on to the Denton County CORE. They will have a new multi-site P25 system.

I am assuming that is the primary system that is listed for Denton Co?

 

[BenScan]

15004 popped up a few days ago on the Denton County site, and sounds like Cooke County EMS.

Mobile/Portable Radio IDs in the 7900### range. Consoles 150, 151.

 

[ffighter17]

15004 popped up a few days ago on the Denton County site, and sounds like Cooke County EMS.

Mobile/Portable Radio IDs in the 7900### range. Consoles 150,

Yes that is EMS talk group. I have part of their system but not sure I have all of it. Do they come up on this system Denton County Trunking System, Denton, Texas
I had that in my sds100 and could not follow it in cooke co but could follow Cooke co with the frequencies I found licensed to them. I have not had time to make a lit to submit on RR

 

[BenScan]

Yes that is EMS talk group. I have part of their system but not sure I have all of it. Do they come up on this system Denton County Trunking System, Denton, Texas
I had that in my sds100 and could not follow it in cooke co but could follow Cooke co with the frequencies I found licensed to them. I have not had time to make a lit to submit on RR

Yes, that's the system I heard 15004 on.

 

[fwradio]

Does anyone have any site info to post into the database yet? Someone put all 12 of the Cooke channels into a single site instead of the 4 sites.
Cooke County
License WRUD885

MUENSTER TX
771.25625
772.68125
774.49375

GAINESVILLE TX
769.75625
772.05625
773.93125

GAINESVILLE TX
769.08125
771.55625
772.93125

GAINESVILLE TX
771.00625
772.35625
774.18125

 

[pmn929]

On OP25, I’ve had the following control channels pop up as Adjacent Sites wile monitoring site 1 of Denton County
Site 5:
772.356250
774.181250

Site 4
772.681250
774.493750

I would assume the NACs would fall inline and be something like 694 and 695

 

[BenScan]

I took a drive to Cooke County today. All 4 sites are up as follows. Sorry, I missed writing down what the control channels were fore Sites 6 & 7. The Uniden SDS100 was showing NAC 690 on them all, but we might want to keep an eye on it. I got a little confused with my Unications because they roamed to Site 1, even though I didn't have that programmed in the Cooke Co knob positions. I guess it got there from the control channel or maybe my Denton programming. I didn't hear any talkgroups other than 15001 and 15004.

MUENSTER TX Site 4
771.25625
772.68125
774.49375 Control

GAINESVILLE TX Site 6
769.75625
772.05625
773.93125

GAINESVILLE TX Site 7
769.08125
771.55625
772.93125

GAINESVILLE TX Site 5
771.00625
772.35625
774.18125 Control