Everything to post 21 is fixed in db...
County paging after ARMER
- Thread starter NDRADIONUT
- Start date
- Status
stmills
Member
COUNTY PAGING AFTER ARMER
Washington County went to North and South Paging when it went to ARMER, but when they narrowbanded they switched to countywide Paging on 154.8450 and discontinued use of 155.1900.
http://forums.radioreference.com/minnesota-radio-discussion-forum/227494-washco-vhf-patch.html
Washington County went to North and South Paging when it went to ARMER, but when they narrowbanded they switched to countywide Paging on 154.8450 and discontinued use of 155.1900.
http://forums.radioreference.com/minnesota-radio-discussion-forum/227494-washco-vhf-patch.html
box23
Member
Wirelessly posted (Mozilla/5.0 (Linux; Android 4.1.2; ADR910L Build/JZO54K) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/27.0.1453.90 Mobile Safari/537.36)
Cook County is using the new 152.0075 Paging channel, T167.9. I haven't confirmed if the the pagers are switched yet, or if the tones actually go out on that frequency.
When paging, the tones are still sent on the fire channel. The voice portion of the page is multicast on analog Fire Dispatch, the new Paging channel, and the Law Admin talkgroup.
Cook County is using the new 152.0075 Paging channel, T167.9. I haven't confirmed if the the pagers are switched yet, or if the tones actually go out on that frequency.
When paging, the tones are still sent on the fire channel. The voice portion of the page is multicast on analog Fire Dispatch, the new Paging channel, and the Law Admin talkgroup.
box23
Member
Lake County appears to be using the old multicast Law system for paging. While in Two Harbors the other day I heard a page for Two Harbors Ambulance through the old Two Harbors Law channel.
This was of course also heard on TG 38013. I believe this is only a multi-select during paging. Acknowledgement by Two Harbors and subsequent traffic for the transfer I heard only on ARMER.
I copied nothing on 155.19 MHz. I only had a portable at the time so I was unable to confirm if the multicast was still in use or if things had been reconfigured.
This was of course also heard on TG 38013. I believe this is only a multi-select during paging. Acknowledgement by Two Harbors and subsequent traffic for the transfer I heard only on ARMER.
I copied nothing on 155.19 MHz. I only had a portable at the time so I was unable to confirm if the multicast was still in use or if things had been reconfigured.
K6ARL
Member
Isanti Co. is no longer using 154.310 MHz. Paging is on 154.430 narrowband.
146.2 PL ??
K6ARL
Member
Yes that is correct.
McLeod County appears to have dropped the PL tone from their paging frequency.
154.415, no tone
154.415, no tone
Is the Stearns Fire Paging still on 154.4000 ? does it have a PL of 123.0 or 146.2 ??
Anyone know for sure what freq and tone Cass County (Walker) is using currently ??
I punched the frequency listed into the scanner, but I suspect I am too far to pick it up.
No dice. My proximity to the local pd repeater, and the local pd is only a few kc's away from the listed paging frequency, prevent that from happening.
K6ARL
Member
Sterns Co
NDRADIONUT,
I've been monitoring the 154.400 frequency, and Sauk Centre has been paged, so I believe that Stearns Co. Is indeed using that frequency. I'll try to figure out the Pl tone.
NDRADIONUT,
I've been monitoring the 154.400 frequency, and Sauk Centre has been paged, so I believe that Stearns Co. Is indeed using that frequency. I'll try to figure out the Pl tone.
Thanx it should be 146.2 or 123.0 ??
dwgelle
Member
Stearns paging freq is 154.400 and the pl is 146.2 if they are still using it. After narrowbanding the VHF a lot are not transmitting the pl tones anymore such as Meeker Co.
box23
Member
St. Louis is no longer using 167.9 Hz for south paging (155.955 MHz). Unable to confirm yet if it has moved to CSQ, back to 131.8 Hz, or to a new tone.
- Status
Similar threads
