Custom table help

Status
Not open for further replies.

mrlthse

Member
Joined
May 6, 2007
Messages
224
Location
Layton, Utah
Greeting all,
I know this is not a new request, However I am an old scanner buff,
Who has just found out that If I use a "Custom Table" that I can here my local public safety people on the 800MHz bands in Utah,using a Radio shack Pro 96 and 2096 radio,
Can anybody help/suggest the software for this function.
Thanks
 
Last edited:

mrlthse

Member
Joined
May 6, 2007
Messages
224
Location
Layton, Utah
Custom table

Greeting,
I see I have two friends who have replied to my earlier request.
I thank you both...
I was thinking if I can work a "custom table" on a radio shack pro 96 and 2096 ,
Can this same table work on the radio shack pro 163 and 164 analog system.
 

ka3jjz

Wiki Admin Emeritus
Joined
Jul 22, 2002
Messages
22,074
Location
Bowie, Md.
Not precisely - it's just a tad different. There are different programs for these radios. See this article for more

PSR-300/400 Software and USB Support - The RadioReference Wiki

My memory is a bit fuzzy on these radios, but I *think* there was both a firmware and software solution needed here (I could easily be wrong). As the RS website probably doesn't have these radios anymore, your next best place to look would be their respective Yahoo group's files area

Mike
 

mrlthse

Member
Joined
May 6, 2007
Messages
224
Location
Layton, Utah
will research custom table application.

Greeting to all,
Thanks for those who replied with feedback on my request of "Custom Tables" for my analog and digital radios, these I will check out... but first a well deserved two week vacation in Calif. or fun and sun.
thanks again.
 
Last edited:
Status
Not open for further replies.
Top