DSDPlus Event file question

[shajoe44]

I am posting 2 different screen shots of a Cap Max event file. In the first it shows the length of the transmission as well as encryption information. In the second this information no longer shows up. I don't remember changing any settings. Is there a reason for this change. Thanks.

2025/08/03 04:29:46 Freq=460.237500 DCC=0 RAS Enc Group call; TG=171 [[Edgefield County EMS]] RID=2066 [MEDIC 2] Ch=2466 Alg=EP/RC4 KeyID=2 7s
2025/08/03 04:29:56 Freq=460.237500 DCC=0 RAS Reg/Auth/MS Check; Tgt=1212 [B12] Src=17480
2025/08/03 04:29:56 Freq=460.237500 DCC=0 RAS ACK: REG/DEREG ACCEPT Tgt=1212 [B12] Src=REGI
2025/08/03 04:29:56 Freq=460.237500 DCC=0 RAS Enc Group call; TG=171 [[Edgefield County EMS]] RID=22000 [[Dispatch]] Ch=2466 Alg=EP/RC4 KeyID=2 2s
2025/08/03 04:30:10 Freq=460.237500 DCC=0 RAS Enc Group call; TG=171 [[Edgefield County EMS]] RID=22000 [[Dispatch]] Ch=2466 Alg=EP/RC4 KeyID=2 1s
2025/08/03 04:30:24 Freq=460.237500 DCC=0 RAS Enc Group call; TG=171 [[Edgefield County EMS]] RID=22000 [[Dispatch]] Ch=2466 Alg=EP/RC4 KeyID=2 1s


2025/08/07 19:48:59 Freq=460.237500 DCC=0 RAS Group call; TG=101 [[Edgefield Co. SD]] RID=1077 [CAR 170] Ch=2412
2025/08/07 19:49:12 Freq=460.237500 DCC=0 RAS Group call; TG=101 [[Edgefield Co. SD]] RID=22000 [[Dispatch]] Ch=2412
2025/08/07 19:49:22 Freq=460.237500 DCC=0 RAS Group call; TG=101 [[Edgefield Co. SD]] RID=22000 [[Dispatch]] Ch=2412
2025/08/07 19:49:32 Freq=460.237500 DCC=0 RAS Group call; TG=101 [[Edgefield Co. SD]] RID=22000 [[Dispatch]] Ch=2412
2025/08/07 19:49:42 Freq=460.237500 DCC=0 RAS Group call; TG=101 [[Edgefield Co. SD]] RID=22000 [[Dispatch]] Ch=2412
2025/08/07 19:49:52 Freq=460.237500 DCC=0 RAS Group call; TG=101 [[Edgefield Co. SD]] RID=22000 [[Dispatch]] Ch=2412

 

[cg]

Perhaps you are no longer voice following the talkgroup? That could be by priority change or by locking the talkgroup out. There are also settings for following encrypted channels under the Control menu.

chris

 

[shajoe44]

Under Encrypted Voice Call Following I have Full Following highlighted.