Feq Q's about DSD

[bowser22]

Ive got it all compiled and running. Have my input device working. What i want to know is why nothing happens after Digital Speech Decoder 1.4.1
mbelib version 1.2.3
Audio In/Out Device: /dev/audio


when will informtation about the decode start showing up? my understanding is that ill set my bct 15 to the talkgroup thats in digital with my tap hooked up and once a transmission comes through the program will show all kinds of information ab decoding and ****.

 

[SCPD]

Ive got it all compiled and running. Have my input device working. What i want to know is why nothing happens after Digital Speech Decoder 1.4.1
mbelib version 1.2.3
Audio In/Out Device: /dev/audio.

Run xoscope to see the waveform. You may need to adjust recording levels.

 

[bowser22]

ive got my bct15 hooked up with disc tap with a 10uf cap and a 10k resistor inline. Im gettign discriminator audio so i know my tap is working. But dsd just acts like nothing is happeneing, no data being spitout or anything it just sits there even while im on the talkgroup and i can hear apco transmissions. My local system is Aliant trunked mobile radio system. Its a smartzone type 2 with apco 25 CAI. by the way im using a regular 10uf cap and not a tantulum if it matters.