Franklin Fire
- Thread starter Z_DEO5
- Start date
Engine104
Member since 2005
Most of the other frequencies are "direct", meaning they are not going through a repeater, so unless you are fairly close, you probably won't hear anything. The LACoFD air to air frequency 130.700 AM has been active.
151.1300 FW Tactics
130.700 RW Tactics
Both extremely busy
130.700 RW Tactics
Both extremely busy
154.400 A/G This is LACoFD A/G
122.675 FW reporting to Fox tanker base
FW tactics should be 151.3175
FW tactics should be 151.3175
Last edited:
Franklin Incident IAP
I have attached a link to the incident action plan for December 11, 2024. On page 14 is the communication plan for the incident.
LAC V-1 COMMAND
LAC V-7D DIV M
LAC V-8D DIV O
CDF T-33 DIV S
CDF T-34 DIV W
CDF T-35 DIV D
CDF T-36 DIV H
CDF T-37 DIV K
CDF T-38 CONTINGENCY
CDF A/G 5 AIR TO GROUND
AIR GUARD EMERGENCY
I have attached a link to the incident action plan for December 11, 2024. On page 14 is the communication plan for the incident.
LAC V-1 COMMAND
LAC V-7D DIV M
LAC V-8D DIV O
CDF T-33 DIV S
CDF T-34 DIV W
CDF T-35 DIV D
CDF T-36 DIV H
CDF T-37 DIV K
CDF T-38 CONTINGENCY
CDF A/G 5 AIR TO GROUND
AIR GUARD EMERGENCY
Changes/additions to above as monitored from Ventura Wednesday afternoon.
123.175 Rotor Wing tac
159.2275 A/G including helibase at Camarillo (CDF A/G 15)
166.6125 Fiwed Wing tac (NIFC ATAC 1)
123.175 Rotor Wing tac
159.2275 A/G including helibase at Camarillo (CDF A/G 15)
166.6125 Fiwed Wing tac (NIFC ATAC 1)
Eng74
Member
Kern County sent a Type 3 Strike Team down this morning. We had already sent a dozer Strike Team and two hand crews.
Just for other people's information a dozer strike team consists of two dozers, their dozer transports and two dozer tenders (mechanic and fuel) who use a small truck with a contractor's box. A strike team of crews consists of two crews, crew transports, crew superintendents with small trucks and a contractor's box, plus a crew strike team leader with separate transportation. County crews (non inmate) and state/county inmate crews tend to vary a little from this.
MalibuMaverick
Newbie
- Joined
- Dec 14, 2024
- Messages
- 2
Hello all. I am new to these forums. I manage a large property in Malibu and was unable to hear LA County fire on my SDS100 and 200. Is this something as simple as updating the firmware?
What is your monitoring location?
MalibuMaverick
Newbie
- Joined
- Dec 14, 2024
- Messages
- 2
In Malibu. 4-5 miles from the fire.
As someone posted above, the communication plans (ICS-220, ICS-204, and ICS-205) for each day are in the IAPs here, e.g., yesterday's can be found at pages 9–17 of 20241214/Franklin IAP 20241214_Corrected.pdf.
Engine104
Member since 2005
Is it possible that you have the old LACoFD comm plan loaded? Go to Los Angeles County, California (CA) Scanner Frequencies and Radio Frequency Reference and scroll down to the County Fire section.
Command is LAC V-1 COMMAND 152.1500. I just began today's monitoring. Be patient Wind is picking up. Smokers.
A/A rotary 132.775 active
1620 All rotary wing off the fire back to Camarillo.
