GPS Question

[N0ZQR]

Have a BC-UTGC cable to interface a BR-35554 receiver(with a torn off end) to work with my SDS-100.
Just need the pin out for the BR cable to put on a replacement end.

Any help would be great!!

Ron

 

[nessnet]

Red/black are obvious (12vDC+-)

The others are data out/in.
I don't remember what color data out is, data in is the white one and it can be left unconnected.

 

[N0ZQR]

I understand the colors, it's the locations on the plug that I kneed to know.

 

[nessnet]

I understand the colors, it's the locations on the plug that I kneed to know.

I just cut/soldered...

 

[N0ZQR]

Would like to use the plug(able to detach )

 

[buddrousa]

You could take an old cable cut it resolder it and make a new cable.

 

[N0ZQR]

Have some 5 pin DIN plugs, hoping to use one of those. Still need to know the orientation of the wires even if I used an old 5 wire cord.
Know that the colors of the wires are not going to be right!
Just what you get when someone gives you something for nothing! They caught the cord in the truck door and tore end off the cable.

 

[kruser]

Have some 5 pin DIN plugs, hoping to use one of those. Still need to know the orientation of the wires even if I used an old 5 wire cord.
Know that the colors of the wires are not going to be right!
Just what you get when someone gives you something for nothing! They caught the cord in the truck door and tore end off the cable.

Have you tried a Google search on the GPS model number.
I know I found the DIN plug pinout for it before along with all its other specs.

There is also a thread here somewhere that shows the 5 pin USB jack pin out on the SDS100 and which pin in its USB jack accepts the Serial data from your GPS unit.

I think the correct GPS model is BR-355S4, not BR-35554

 

[N0ZQR]

You’re right on the model.got the inf for th usb now need the DIN.May just get a all new antenna!

 

[kruser]

You’re right on the model.got the inf for th usb now need the DIN.May just get a all new antenna!

Look at pages 13 and 15 in the pdf at this link: https://www.globalsat.com.tw/ftp/download/GMouse_Win_UsersGuide-V1.0.pdf

It has the pinout for the din connector as well as all the specs for the BR model like yours.

 

[N0ZQR]

That's the information that I was looking for thanks!

Now to get to work!

 

[N0ZQR]

Kruser, thanks for the information. I now have GPS for my SDS100!