• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Help needed Unication PPS

Status
Not open for further replies.
B

BryceT

Member
Premium Subscriber
Joined
Dec 1, 2007
Messages
10
Location
St. Ignace
Ok, here is my issue...
I had to download Unication PPS to a new computer (MS Surface Pro4, Windows 10 Pro 64bit) PPS loaded without issue. However, connected a G4 pager via USB cable, USB Device Manager shows no issues. Within PPS it will not show "Connected Devices"...

I currently cannot read/write and or create a profile from a pager that is connected via USB. Yes, I have uninstalled and reinstalled, also used "run as administrator also.

Does anyone have any ideas??
 
B

BryceT

Member
Premium Subscriber
Joined
Dec 1, 2007
Messages
10
Location
St. Ignace
I found my answer. You have to manually download the Windows driver from the Unication download site. The driver within the PPS download may not work for some users. Unication is aware and is working to correct the issue.
 
Status
Not open for further replies.

Similar threads

H
Retevis Cannot install OpenGD77 on my Retevis RT3s: Com Port cannot be accessed
Replies
8
Views
599
hamster-radio
H
H
Dual PC SDR Scanning setup with auto-recovery and redundancy (6x SDR, Dual PC w/ i7, 8GB RAM)
Replies
0
Views
1K
hruskacha
H
E
  • Sticky
New PPS Version: 4.0 (V0.4.0.36) Released
2
Replies
28
Views
4K
RRR
RRR
TGuelker
ProScan: ProScan display going dark at times
2
Replies
24
Views
2K
jjn555
J
S
Motorola TETRA MTH800 & MTP850 - can't get into programming mode manually
Replies
2
Views
2K
AM909
A
Top