Help with PSRN in Hamilton

[mbstone99]

I am stumped with this all. I have the same problem with Hamilton.. got the bandplan in my radio but only get TG's to flash on the screen.

In DSD I am seeing Hamilton being reported as
Ch 0-828, TDMA 1-1656/57 for 142.2150
Ch 0-846 for 142.3500 SCC
Ch 0-906 for 142.8000 CC

Can someone double check the bandplan? Also oddly I am still seeing Hamilton's only neighbour is Toronto (Site 40).

Matt

 

[gary123]

for P2 X2 you do not need a band plan. the system sends the TG freq and slot when a TG is used. Worst case you may have to enter in all three freq into the site.

 

[mciupa]

I decided to give it a try in Toronto. The BCD 325P2 is only showing active talkgroups with no audio. The BCD 536HP is passing audio.

The Band Plan was auto populated by the system in the 325. The picture I posted shows older programming. You see that Band Plan D is zeros, actually in the radio it shows 769.00000 and 6.25 like Band Plan C.

With the 536, the Band Plan is blank, probably since Day 1 when I created a new system in a Favourite List. On DSD+ Fast Lane, I hear all audio, even unmuted encrypted. One thing though, sometimes a lot of data is being passed and no conversation. It could be we are seeing these registrations and affiliations showing up on the talkgroups.

BCD 325P2 Freescan


BCD 536HP Sentinel

Network: BEE00.AD9

DSD+ Fast Lane

Bandplan #0: Base=136.005 Offset=-4.02 Spacing=7.5 BW=12.5
Bandplan #1: Base=136.005 Offset=-4.02 Spacing=7.5 BW=12.5 Slots=2
Bandplan #2: Base=136.005 Offset=-4.05 Spacing=7.5 BW=12.5
Bandplan #3: Base=136.005 Offset=-4.05 Spacing=7.5 BW=12.5 Slots=2
Bandplan #4: Base=136.005 Offset=-2.235 Spacing=7.5 BW=12.5
Bandplan #5: Base=136.005 Offset=-2.235 Spacing=7.5 BW=12.5 Slots=2
Bandplan #6: Base=136.005 Offset=-2.145 Spacing=7.5 BW=12.5
Bandplan #7: Base=136.005 Offset=-2.145 Spacing=7.5 BW=12.5 Slots=2
Bandplan #12: Base=769. Offset=+30 Spacing=6.25 BW=12.5
Bandplan #13: Base=769. Offset=+30 Spacing=6.25 BW=12.5 Slots=2
Bandplan #14: Base=851.0625 Offset=-45 Spacing=6.25 BW=12.5
Bandplan #15: Base=851.0625 Offset=-45 Spacing=6.25 BW=12.5 Slots=2

 

[EJB]

With the 325 when I program it the settings for the sites change. I populate it as 5 second hold, which stays but the P25 Wait time, I program it 200, it goes to 400 when I bring it back up. And Modulation, I program it as FM but when I went to make a few changes it becomes NFM.

There's no audio, but activity pops up on the screen. The sds and 436 shows no activity at all.

I'm hoping someone figures it out or I find something. I remain unable to figure it out.

E

 

[mbstone99]

I decided to give it a try in Toronto. The BCD 325P2 is only showing active talkgroups with no audio. The BCD 536HP is passing audio.

The Band Plan was auto populated by the system in the 325. The picture I posted shows older programming. You see that Band Plan D is zeros, actually in the radio it shows 769.00000 and 6.25 like Band Plan C.

With the 536, the Band Plan is blank, probably since Day 1 when I created a new system in a Favourite List. On DSD+ Fast Lane, I hear all audio, even unmuted encrypted. One thing though, sometimes a lot of data is being passed and no conversation. It could be we are seeing these registrations and affiliations showing up on the talkgroups.

BCD 325P2 Freescan View attachment 161215


BCD 536HP Sentinel View attachment 161216

Network: BEE00.AD9

DSD+ Fast Lane

Bandplan #0: Base=136.005 Offset=-4.02 Spacing=7.5 BW=12.5
Bandplan #1: Base=136.005 Offset=-4.02 Spacing=7.5 BW=12.5 Slots=2
Bandplan #2: Base=136.005 Offset=-4.05 Spacing=7.5 BW=12.5
Bandplan #3: Base=136.005 Offset=-4.05 Spacing=7.5 BW=12.5 Slots=2
Bandplan #4: Base=136.005 Offset=-2.235 Spacing=7.5 BW=12.5
Bandplan #5: Base=136.005 Offset=-2.235 Spacing=7.5 BW=12.5 Slots=2
Bandplan #6: Base=136.005 Offset=-2.145 Spacing=7.5 BW=12.5
Bandplan #7: Base=136.005 Offset=-2.145 Spacing=7.5 BW=12.5 Slots=2
Bandplan #12: Base=769. Offset=+30 Spacing=6.25 BW=12.5
Bandplan #13: Base=769. Offset=+30 Spacing=6.25 BW=12.5 Slots=2
Bandplan #14: Base=851.0625 Offset=-45 Spacing=6.25 BW=12.5
Bandplan #15: Base=851.0625 Offset=-45 Spacing=6.25 BW=12.5 Slots=2

Hmm strange it almost seems for some reason it's not auto populating.. and almost seemed like that's the same issue I had with DSD+ when monitoring the Hamilton tower. Even with manually putting the above bandplan in my radio through it is still not working correctly.

Matt