How to use ARC125 to label BANKS?

Deboradio

Member
Joined
Oct 5, 2015
Messages
47
Location
Cyprus
I have purchased the ARC125 and I have managed to put various frequencies in several banks.
Although I can change the bank names in the software, when uploaded to the radio I am not able to store the bank names,
they remain as Bank 1,2,3 etc.
Is there a way to do this, or does the UBC125XLT do not have a provision for naming the banks?
 

Deboradio

Member
Joined
Oct 5, 2015
Messages
47
Location
Cyprus
I have noticed now that this can only be done in software mode. So, yes, my question is answered.
No provision.
 

tvengr

Well Known Member
Joined
Feb 10, 2019
Messages
11,031
Location
Baltimore County, MD
From Butel Software:

The scanner does not store/display bank names, if you run ARC125 virtual control you will see the banknames displayed on your PC screen.
Also you can print a small 'banknames' sticker using the ARC125 print menu.

Gommert
Butel Software
 

bubbaearle

Active Member
Premium Subscriber
Joined
Mar 10, 2005
Messages
604
I use my 125AT mostly for air band monitoring so I use the first frequency in each bank as a bank NAME with 0.000 for the frequency.

Just press HOLD, channel # & HOLD again...1, 51, 101, etc

1 LRAFB AIR OPS
51 LRAFB ATC OPS
101 MIL AIR 1
151 MIL AIR 2
201 CIVIL AIR
251 ZME AR
301 KLIT ADAMS FIELD
351 KMEM MEMPHIS
401 MISC
451 AERO MEDICAL

I have quite a few radios so I sometimes forget what is what & this helps me remember what's in each bank .

It's tough getting old!
 
  • Like
Reactions: wtp
Top