• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

HT750 / Ht1250 programming question

Status
Not open for further replies.

scannerboy55

Newbie
Joined
Oct 26, 2009
Messages
1
Location
LaPorte, IN
Is there anyway to program the HT 750 and HT1250 to beep or triple beep after the release of the PTT button ? My personal Kenwood does but cant seem to find it in the motorola software, Please help if possible.

Thank you

Jason
 

RadioGuyUSA

Member
Joined
Jan 17, 2010
Messages
7
Location
Burbank, CA
HT 750 and HT1250 > personal Kenwood

Is there anyway to program the HT 750 and HT1250 to beep or triple beep after the release of the PTT button ? My personal Kenwood does but cant seem to find it in the motorola software, Please help if possible.

Thank you

Jason

Hello Jason, i have a friend who can probably solve the problem ... i will get back to you tomorrow :cool:
 

ptfd13

Member
Joined
Jan 29, 2009
Messages
10
Location
Columbus, Ohio
Are you meaning beep over the air on the channel you were transmitting or through the speaker on the radio itself?
 

C138NC

Tactical Taco Consumer
Joined
Jan 10, 2009
Messages
741
Location
NC Taco Command
The MDC1200 would allow your radio to beep when you release the PTT button and the beep would be over the air if this is what you are asking.

I thought he was talking about the triple beep and someone here said it was a setting in the CPS for QC decoder or something, then another said it was something with the signaling... not sure if thats what he meant.
 
Status
Not open for further replies.
Top