Hytera MD782i

[Uslanru4]

Hello dear friend,
How are you doing?
I really hope for your help , a couple of days ago I was given a hytera md782i vhf
Model number: MD782-000G0000-000001-V1-B-A

Unfortunately, I can’t program the frequencies I need,
because I get a “cps Area doesn’t match” error, Please help me solve this problem. This is my first time working with a hytera radio station, thank you very much! good luck with respect !

 

[0xFF1E071F]

Check my post here.

Hytera HP602Um CPS Area dosent match

Hi all, facing issue while flashing hytera HP602. CPS Area doesn't match. I guess i have a wrong version of software. but i have no idea where i can find and which one i need. I wonder if someone can point me in right direction

forums.radioreference.com

You did not mention your radio's area!

If your radio was built for NA you cannot use a SA-compatible CPS, you need NA-compatible CPS

What is your radio's area and what is your CPS version and area!

 

[YL3IM]

Making a CPS multi-region

In Windows Explorer, open the CPS installation folder.

Proceed to the config subfolder.

Open tle last archive (either .zip or .7z) inside it.

Open the Model.dat file inside the archive.

Locate the line with [Area] inside the Model.dat file.

Replace the lines below with:

Number=5

Area0=0
Area1=2
Area2=5
Area3=6
Area4=8

Save the Model.dat file into the archive.

Now the CPS should become multi-region. 🙏

Don't worry if the fonts inside the CPS become weird — it's expected and it's considered ok.

 

[Uslanru4]

Making a CPS multi-region

In Windows Explorer, open the CPS installation folder.

Proceed to the config subfolder.

Open tle last archive (either .zip or .7z) inside it.

Open the Model.dat file inside the archive.

Locate the line with [Area] inside the Model.dat file.

Replace the lines below with:

Number=5

Area0=0
Area1=2
Area2=5
Area3=6
Area4=8

Save the Model.dat file into the archive.

Now the CPS should become multi-region. 🙏

Don't worry if the fonts inside the CPS become weird — it's expected and it's considered ok.

Thank you very much You helped me a lot, good luck 73!

 

[Uslanru4]

Hello dear colleagues! Unfortunately, I cannot change the channel width from 12.5 to 25 kilohertz, my program does not allow me to do this. Please tell me what changes should I make to the program so that I can make the channel bandwidth 25 kHz? Thank you!

 

[YL3IM]

Try this approach: PD362 Wideband Unlock

 

[Uslanru4]

Try this approach: PD362 Wideband Unlock

Hello, thank you, please tell me in which folder should I save this license file? I tried several options but it didn't work, maybe I'm doing something wrong. Thank you

 

[YL3IM]

In the C: directly.