327skidoo
Member
hi all i am trying to reprogram my IC-4001 handheld i have it password protected when i type in my cloning password and it starts to clone than i error message comes up cause the hand held shuts off what am i doing wrong
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
icom ic 4001 programming
- Thread starter 327skidoo
- Start date
- Status
mmckenna
I ♥ Ø
What is the error message that pops up?
327skidoo
Member
mmckenna
I ♥ Ø
Battery charged?
Correct password (case sensitive)?
etc.....
Correct password (case sensitive)?
etc.....
cabletech
Member
That is not a password error. That indicates that your software is are not talking to the radio.
What cable are you using and what com port?
You need to check your com port to make sure you are using the correct port.
If you are useing a USB, set your com port to port 2, 3, 4 and make sure you have the correct driver.
The best driver for these USB cables is Proflic PL 2303.
I use this driver for all my USB cables and never have a problem.
What cable are you using and what com port?
You need to check your com port to make sure you are using the correct port.
If you are useing a USB, set your com port to port 2, 3, 4 and make sure you have the correct driver.
The best driver for these USB cables is Proflic PL 2303.
I use this driver for all my USB cables and never have a problem.
327skidoo
Member
ya i agree but a can program my other 4001 with it and all my 3001 s with it without trouble and its the very same prograhm and cable that i originally programmed the 4001 with
327skidoo
Member
unless me not remembering the password is throwing that message
- Status
