I'm running a BC365CRS with a longer antenna from Amazon. Is there any way I could adjust something to improve reception or audio quality, or are there any better antenna suggestions?
Is there a way to get better reception and audio quality on an indoor antenna?
- Thread starter Clay_Lowery
- Start date
Try a mobile-style antenna placed in a window sill or a mag-mount antenna outside on a metal surface. Whatever you can do to get an antenna out of the house is likely to help.
Not sure if you your unit has a removable antenna or not. Also been looking for a better wide band scanning antenna.
So far research revealed plenty of folks seem pleased with a discone style antenna for reception. Especially if it's a fixed unit either in the attic or outdoors. Using it in a portable or mobile configuration, not so much.
It might not be for you, but certainly worth a look.
So far research revealed plenty of folks seem pleased with a discone style antenna for reception. Especially if it's a fixed unit either in the attic or outdoors. Using it in a portable or mobile configuration, not so much.
It might not be for you, but certainly worth a look.
Thank you for the replies. I just bought a discone antenna and and I was going to switch to an SDR setup, so I think that should help a lot.
Let us know how it goes
Just got everything set up with two SDR dongles and a Tram 1411 antenna hung in the attic. Everything seems to be working fine. It's just with sdrtrunk, the squelch tails are ridiculously loud on narrow FM.
If you are running Windows there is an auto leveling setting someplace in the sound settings. I use it on my Windows 10 computer running Unitrunker. It helps a lot! Let me know if you can't find it and I will take a look and try to provide more details.
Indoor dwelling have outside Stucco (Metal Lath) is needed to support it, gives Indoor Scanner Antennas poor performance, putting my SDS 100 on The Window ledge improves reception somewhat.
I Also have 7 aftermarket Antennas for my SDS 100 same issues, take it outside they work good.
I just went with outside antennas with good quality Coax, It’s like a brand new Radio much more Gain.
I Also have 7 aftermarket Antennas for my SDS 100 same issues, take it outside they work good.
I just went with outside antennas with good quality Coax, It’s like a brand new Radio much more Gain.
Last edited:
What are you scanning? Generally an antenna that is tuned for the frequency of interest will yield the best results. Discone is wide banded meaning it covers multiple ranges but may not excel in certain ranges.
Similar threads
