Hi Folks,
I've been working on this room for months literally as time has allowed and I "think" I have it to where I want it to be (for now anyways...).
Equipment is as follows: Airspy R2, SDRPlay RSPdx, 2 Airspy Mini's, Uniden BCD536HP (main scanner). In the rack I have an Icom IC-R8500, 2 Uniden BCT15's, 1 Uniden BCD996XT, 1 Uniden BCT15X, and 1 Uniden BCD996P2 that is connected to ProScan running constantly for unattended logging. There is also my old trusty antenna patch panel that involves a 4 port and 8 port Stridsberg multicoupler as well as one of the good ol' Electroline multicouplers. The amateur radio is a Yaesu FT-991A that utilizes a MFJ-993B tuner for two multi-band doublet wire antennas that I purchased from trueladderline.com. Equipment is powered by 3 different Samlex SEC1223 power supplies. There are 3 PC's, all mini's, 2 Dells and 1 HP, all running Windows 10. There is also a Raspberry Pi that runs PiAware for ADS-B aircraft tracking. My data is shared with FlightAware and I am using the FlightAware ProStick Plus dongle. I also have a tower that is mounted to the right side of my house. The tower supports a Comet GP-15N at the top, a side mounted Scantenna, side mounted Comet GP-6NC, ADS-B antenna, weather station, and is the center support for both HF wire antennas. The Yagi is a 900 MHz and is not currently in use. There is also a second desk in the shack and a 32" HDTV mounted on the wall behind the radio desk (no pic of this). There are also several portable scanners and ham tranceivers (not shown).
