• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

KPG-141DN

Status
Not open for further replies.

BigRedBox80

Member
Feed Provider
Joined
Apr 23, 2015
Messages
170
In KPG-49D there is a System Merge where you can organize the CHANNEL list. In KPG-141D there is a Zone Merge, and as far as I can tell one can only organize ZONES but not the CHANNELS within that zone. Am I missing anything?
 

BigRedBox80

Member
Feed Provider
Joined
Apr 23, 2015
Messages
170
So, if I have 15 channels within one zone, I can't organize within that zone?
 

BigRedBox80

Member
Feed Provider
Joined
Apr 23, 2015
Messages
170
You can cut and paste channel info if you right click on the channel number on the far left side.

Looks like I can copy and paste but no cut. I'll see about making that work if that's all I can do.
 

mmckenna

I ♥ Ø
Joined
Jul 27, 2005
Messages
23,860
Location
Roaming the Intermountain West
Sorry, it's been a helluva long day. Copy and paste, you are correct. But once you copy and paste, you can go back and delete the entry you don't want. Not sure about the '141, but other software will allow you to select multiple lines and copy/paste. You can grab a bunch, move them down, and then add a new line.
 
Status
Not open for further replies.
Top