John_M
Member
I want to monitor an LTR system, can I do this with missing LCN's.
The LTR sytems that I would like to monitor are Monroe County N.Y.
The LTR sytems that I would like to monitor are Monroe County N.Y.
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
LTR Systems with missing LCN's
- Thread starter John_M
- Start date
- Status
Depending on the svcanner you use.. YES....
With a PRO-92, PRO-2067, PRO-2051 *As far as I can tell* You only need to set for LTR and put the freqs in....
With others especially the Unidens, and the PRO-97, you MUST put in LCN order.
With a PRO-92, PRO-2067, PRO-2051 *As far as I can tell* You only need to set for LTR and put the freqs in....
With others especially the Unidens, and the PRO-97, you MUST put in LCN order.
John_M
Member
Milf:
Scanner will be BCD396T. There are three LTR systems in my county (Monroe / N.Y.) Two of the systems have LCN's that are N/A. Take a look in RR and see what you think of these three systems, one of them has all LCN's listed the other two have LCN's that are misssing. I really want to monitor the third LTR system.
Scanner will be BCD396T. There are three LTR systems in my county (Monroe / N.Y.) Two of the systems have LCN's that are N/A. Take a look in RR and see what you think of these three systems, one of them has all LCN's listed the other two have LCN's that are misssing. I really want to monitor the third LTR system.
John_M
Member
Unidens must be in order. But if you take a look at the systems they have
LCN's that are N/A.
LCN's that are N/A.
John_M
Member
Milf:
Just skip the N/A's and put in order? I have never programmed a LTR system.
Just skip the N/A's and put in order? I have never programmed a LTR system.
Al42
Member
Yes - just leave the N/A channels blank.
John_M
Member
Thanks Al24.
D
DaveNF2G
Guest
JMedley_1 said:
Did you check the NF2G Scannist Pages to see if there is more complete info there?
Correct on the info.. skip empty ones till you know what freqs fit there if any.... Some LTR systems have like only 3 freqs.. but are set up like... LCN's 3, 20, and 40.....
John_M
Member
Dave Wrote:
There are a number of businesses listed as being LTR trunked. When I click on the "trunked" it says missing url.
There are a number of businesses listed as being LTR trunked. When I click on the "trunked" it says missing url.
- Joined
- Jun 27, 2002
- Messages
- 2,008
- Reaction score
- 275
John_M
Member
pro92b Wrote:
I will compare the two data references RR/NF2G when I get some time.
- Joined
- Jun 27, 2002
- Messages
- 2,008
- Reaction score
- 275
The RR listing for Genesee 2 definitely has problems. There are listed ID's homed to repeater numbers 8, 14, and 17 but no frequencies are listed for those LCN's. Dave may have better information and you will have to monitor the system to confirm which data is right.
D
DaveNF2G
Guest
Almost every UHF system I have monitored Homes on repeater 4.
- Status
