Mercer county trs 2021

[bailly2]

New talkgroup 424. Encrypted..radio ids 4112000 and 4113029. No listiing in wiki or database for either. Listen to the input frequencies and note where its heard might tell us something

 

[GTR8000]

An encrypted TG that no one can listen to anyway...

 

[jimmie13]

Unless you had the encryption key

 

[u2brent]

New talkgroup 424. Encrypted..radio ids 4112000 and 4113029. No listiing in wiki or database for either. Listen to the input frequencies and note where its heard might tell us something

You could always just add it...

Mercer County (NJ) Interoperable Public Safety Radio System Unknown Unconfirmed Talkgroups - The RadioReference Wiki

wiki.radioreference.com

Mercer County (NJ) Interoperable Public Safety Radio System Radio IDs - The RadioReference Wiki

wiki.radioreference.com

 

[trentbob]

Given the number of the talk group I'm going to say it's Lawrence or Hopewell PD with a new encrypted car-to-car Channel.

 

[ptemt]

Based on the way the county assigns the radio ID's, it looks like Hightstown. I can tell you for sure it isn't Lawrence.

 

[kd2pm]

Based on the way the county assigns the radio ID's, it looks like Hightstown. I can tell you for sure it isn't Lawrence.

Well that would be an interesting turn of events if Hightstown started using the county system. I know FD does on east response...I was thinking more like PD. Hightstown is still on 453.700 if memory serves me.

 

[trentbob]

Yes I have heard nothing about Hightstown going on the county TRS. I was going by the talk group number in the in the 400s thinking that it might be Lawrence. Other than the encrypted stuff with the Sheriff's Department Etc I only know of Lawrence and Hopewell PD on the TRS. West Windsor PD 1 + 2 is now on the state interop system and come in great on the Bordentown simulcast site on the other side of the Burlington-Bristol Bridge in Bristol. Hamilton PD stays with their UHF digital conventional and Ewing with their p25 encrypted system. Hightstown and Robbinsville still use the old UHF in the clear.

They've made sure that every Department bordering each other is on a different system LOL thank goodness for the Mercer County alert system which is still used so at least dispatchers can talk to each other.

 

[GTR8000]

Speaking of verified, accurate information and not making assumptions about this system...can any locals confirm that the system is only operating on the 500-502 MHz frequencies, and that no 507 or 508 MHz frequencies have been added? I seem to recall some use of 507-508 back in the day, but that they haven't been active in ages, although still licensed. I've looked at some of the recent transmissions on the Calls node for this system, and I see no traffic channels in the 507-508 range.

 

[ACADEMIContractor]

Well a little more than assumption comments. Looking at some of the members here any assumptions are based on quite a lot of experience and time around this system which is quite long in the tooth now. Seems like yesterday it came out but it's been quite a while. LOL

Anything you've got please, chimed in, I'm always looking for inside information. Usually it comes from some of the folks here.

Mercer County NJ

507.3000 p25 phase 1
507.5750 p25 phase 1
507.7250 p25 phase 1
508.6

Speaking of verified, accurate information and not making assumptions about this system...can any locals confirm that the system is only operating on the 500-502 MHz frequencies, and that no 507 or 508 MHz frequencies have been added? I seem to recall some use of 507-508 back in the day, but that they haven't been active in ages, although still licensed. I've looked at some of the recent transmissions on the Calls node for this system, and I see no traffic channels in the 507-508 range.

That’s why I sent you guys the list of Mercer Co other channels they are accurate and confirmed and listened to them, 38 yrs in Public Safety and Government Contractor Satcom Operator , I know my stuff and being accurate on my radio frequencies, what’s not accurate on RR is you’re satcom frequencies all false stuff.

 

[GTR8000]

Mercer County NJ

507.3000 p25 phase 1
507.5750 p25 phase 1
507.7250 p25 phase 1
508.6


That’s why I sent you guys the list of Mercer Co other channels they are accurate and confirmed and listened to them, 38 yrs in Public Safety and Government Contractor Satcom Operator , I know my stuff and being accurate on my radio frequencies, what’s not accurate on RR is you’re satcom frequencies all false stuff.

The frequencies you submitted were either a bunch of repeater inputs (which are not listed for trunked systems in the database), or frequencies that no one else in the area has submitted. In particular, the 507 and 508 frequencies that I haven't seen any evidence of being active on the P25 system thus far. Show me a screenshot from Unitrunker or some other software indicating usage of 507/508 frequencies on the Mercer County P25 system, and then we'll add them to the system. Submitting stuff that is on an FCC license without providing any verification isn't going to get them added to the database.

 

[bailly2]

Is it east windsor pd?. Have not heard them all day.

 

[trentbob]

Is it east windsor pd?. Have not heard them all day.

Wow I don't listen that far East so I haven't noticed but if they disappear, it makes sense!

 

[NESN]

Is it east windsor pd?. Have not heard them all day.

No.

 

[kd2pm]

EW PD is still on UHF and EMS/Fire page is on their crappy VHF repeater that should be shot and put to death already. Sounds awful. Last I knew the mayor had the $$ to replace everything...At least some of their DTMF radios were replaced with MDC but still...I wish they would get with the times.

 

[trentbob]

EW PD is still on UHF and EMS/Fire page is on their crappy VHF repeater that should be shot and put to death already. Sounds awful. Last I knew the mayor had the $$ to replace everything...At least some of their DTMF radios were replaced with MDC but still...I wish they would get with the times.

So someone has heard East Windsor Police on the old UHF today? I agree about 154.025, I've been listening to that over 40 years lol.

 

[TNDispatcher]

Hey guys I’m looking for some help. Is Mercer county fire dispatch still analog and response digital ? I live in NJ and I’m sending my mom a scanner and want to program it for her
Just fire, ems and PD and NJSP for her area. She lives near white horse circle

 

[kd2pm]

Hey guys I’m looking for some help. Is Mercer county fire dispatch still analog and response digital ? I live in NJ and I’m sending my mom a scanner and want to program it for her
Just fire, ems and PD and NJSP for her area. She lives near white horse circle

They are still dispatching on VHF analog 154.43/103.5 with response on P25

 

[TNDispatcher]

So they dispatch put county wide on the same channel ? That’s crazy lol