Has anyone been successful in doing this? If so, how?
Monitoring Kernersville Medical Center (a Novant facility) with a Uniden scanner
- Thread starter radionut44
- Start date
- Status
Have you tried listening to the freqs listed on this license? There appears to be 2 analog freqs listed.
000452.36250000 | 1 | 1 | 1 | FB2 | | 1 | | 100.000 | 75.000 |
000452.36250000 | 2 | 1 | 1 | MO | | 50 | | 40.000 | 80.000 |
000452.48750000 | 1 | 1 | 2 | FB2 | | 1 | | 100.000 | 75.000 |
000452.48750000 | 2 | 1 | 3 | MO | | 50 | | 40.000 | 80.000 |
000457.36250000 | 2 | 1 | 2 | MO | | 50 | | 40.000 | 80.000 |
000457.48750000 | 2 | 1 | 4 | MO | | 50 | | 40.000 | 80.000 |
Last edited:
- Joined
- Apr 25, 2011
- Messages
- 1,440
FCC Callsign WQMA561 (Novant Health Inc dba Kernersville Medical Center) I would assume. Analog voice if the license is correct.
georgew0819
Member
Might try monitoring Winston-Salem / Forsyth ounty system Winston-Salem / Forsyth County Trunking System, Winston-Salem, North Carolina - Scanner Frequencies as well. Novant Rowan is on Salisbury/Rowan P25 system (Novant Public Safety and the ER)
FCC Callsign WQMA561 (Novant Health Inc dba Kernersville Medical Center)
FCC Callsign WQMA561 (Novant Health Inc dba Kernersville Medical Center)
www.radioreference.com
I programmed only the frequency and the mode as DMR. The other parameters were shown when received.
My BCD436HP with Dmr upgrade is receiving other One frequency DMR and MotoTURBO systems fine, but won’t this one…I have tried programmed both ways.
Based on the license I have also tried analog nfm, and one frequency P25. In conventional Discovery I get periodic buzz like listening to a trunking control channel, but never at the same time the PSR is receiving a voice transmission. Identical antennas on both radios.
WS-FC TRS system has TG for EMS to KMC, but I want to monitor KMC Security. I live only a few miles from the hospital.
I would not expect to receive slot and color code information on a non DMR system
Unless they switched systems and neglected to update/modify license, not unusual.
But the question remains why the Uniden will not receive it. The hope in starting this thread was to find someone else who has received on a Uniden, or has tried and not been successful either. There are not a lot of transmissions but I log receptions on both scanners so I know the transmissions i do not get on the Uniden, even if set to receive only the one target system.
Kernersville Medical Center, Baptist, Baptist Peds.
All three have talkgroups on the Viper system.
Look under the Viper Hospital listing.
David
All three have talkgroups on the Viper system.
Look under the Viper Hospital listing.
David
The VIPER tg are EMS to ED use. I get them on VIPER. I am trying to receive the security and operations transmissions.
- Status
Similar threads
BCD325P2/BCD996P2:
Program a Uniden BCD996P2 Digital Scanner
