Monitoring uhf trunked systems

Status
Not open for further replies.

mikext

Member
Joined
Jun 7, 2003
Messages
322
Location
Virginia
I'm trying to monitor Norfolk Naval Bases and Norfolk Naval Ship yard uhf trunked systems using a pro-96 to track the system. I can manually get the control channels with the system id, But unable scan and track the system id's. Help!!
Thanks, Mike
 

fmon

Silent Key Jan. 14, 2012
Joined
May 11, 2002
Messages
7,741
Location
Eclipse, Virginia
Mike,

If you aren't using Win96 you need to set the trunking tables.
In the bank(s) with the system(s) press PGM>TRUNK>FUNC + 2
Key in 406.0000 base and press ENTER
Key in 380 and press ENTER
Press DOWN button to 12.5KHz and press ENTER
FUNC + 3
Press DOWN button to Table on bottom line and press ENTER
SCAN
 

mikext

Member
Joined
Jun 7, 2003
Messages
322
Location
Virginia
UHF Trunked systems

Frank, I followed your directions initally during the programming and nothing. My question would be do I need to enter all frequencies or just the control channels? This system has stumped me for sometime.
 

fmon

Silent Key Jan. 14, 2012
Joined
May 11, 2002
Messages
7,741
Location
Eclipse, Virginia
Frank, I followed your directions initally during the programming and nothing. My question would be do I need to enter all frequencies or just the control channels? This system has stumped me for sometime.
Just the controls. The normal control is 406.7250 for NOB and is currently active. 408.5250 is normal and currently active for the Shipyard.
 

mikext

Member
Joined
Jun 7, 2003
Messages
322
Location
Virginia
UHF trunked system.

No my PC won't open any type of zip file. I have both CC for NNSY and talk id's entered CC are set to motorola mode and still nothing.
 
Status
Not open for further replies.
Top